<div>Hi!<br></div><div>I had not much experience with FRR in production, but I gave it a try some time ago in a lab and was able to build L3VPN service on VMs with kernel VRF support. You can see details in my blog post - <a href="http://dvjourney.yman.site/2018/10/26/l3vpn-on-linux/">http://dvjourney.yman.site/2018/10/26/l3vpn-on-linux/</a><br></div><div>For L2VPN, as stated in docs, only OpenBSD supports VPWS/VPLS at the moment. <a href="http://docs.frrouting.org/en/latest/overview.html#feature-matrix">http://docs.frrouting.org/en/latest/overview.html#feature-matrix</a><br></div><div><br></div><div class="protonmail_signature_block"><div class="protonmail_signature_block-user"><div>Yakov Sh.<br></div><div>telegram: @darkyman<br></div></div><div class="protonmail_signature_block-proton protonmail_signature_block-empty"><br></div></div><div><br></div><div>‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐<br></div><div> On Monday, November 23, 2020 12:15 PM, Olivier CALVANO <o.calvano@gmail.com> wrote:<br></div><div> <br></div><blockquote class="protonmail_quote" type="cite"><div dir="ltr"><div>Hello,<br></div><div><br></div><div>I have just installed FRR for the first time on a Linux CentOS 8 distribution. I am therefore just starting out.<br></div><div><br></div><div>I am gradually reading the forums but there is a lot of information. FRR manages without worries the BGP and the ISIS which I use regularly on my cisco routers.<br></div><div><br></div><div>I am now trying to find out if FRR can integrate more deeply into my network, particularly at the MPLS level. as I understood it is in the Kernel that this is done and not in FRR, but is there a way to integrate VRF IP VPN? and the creation of a VLAN type subinterface directly in FRR?<br></div><div><br></div><div>Then last question: Is there an implementation of the Cisco EoMPLS equivalent in FRR? (xconnect encapsultation mpls)<br></div><div><br></div><div>thank you<br></div><div>Olivier<br></div></div></blockquote><div><br></div>