Hello Shuvro,

Your setup is almost complete. What is missing is the interface configuration.

For each interface you would advertise TE information through the routing protocol, you need to add 'link-param' statement. Please refer to this section in FRR documentation: http://docs.frrouting.org/en/latest/zebra.html#link-parameters-commands  You also find some complete example for OSPF here: http://docs.frrouting.org/en/latest/ospfd.html#ospf-configuration-examples

Let me know if you have any trouble

Regards

Olivier

Hi Team,

Want to know if SR TE is supported in the latest stable release of FRR.

I can see few TE related CLIs like : mpls-te on under router ospf and other segment routing commands but not able to see the TE parameters being used.

My config for device1 looked like below:

router ospf

 ospf router-id 1.1.1.1

 network 1.1.1.1/32 area 0

 network 20.1.1.0/24 area 0

 capability opaque

 mpls-te on

 mpls-te router-address 1.1.1.1

 segment-routing on

 segment-routing global-block 10000 19999

 segment-routing node-msd 8

 segment-routing prefix 1.1.1.1/32 index 1100 no-php-flag

 router-info area

I have installed required mpls kernel modules in the box but if I go and check mpls-te interface ,I see below:

show ip ospf mpls-te interface 

  eth0: MPLS-TE is disabled on this interface

  eth1: MPLS-TE is disabled on this interface

  eth2: MPLS-TE is disabled on this interface

  eth3: MPLS-TE is disabled on this interface

  lo: MPLS-TE is disabled on this interface

Can anyone throw some light on how to make use of the TE parameters.

Thanks,

Shuvro

_______________________________________________
dev mailing list
dev@lists.frrouting.org
https://lists.frrouting.org/listinfo/dev

_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.