Hi Donald,I added the password which can be seen in zebra.conf below and restart frr using following commands.systemctl stop frrsystemctl start frrsudo cat /etc/frr/zebra.conf[sudo] password for sidhesh:! Zebra configuration saved from vty! 2002/02/28 01:46:12!hostname LinuxRouterpassword zebraenable password z3bRalog file /var/log/zebra/zebra.log!interface eth0description Interface to External Networkip address 10.0.0.1/24!interface eth1description Interface to Internal Networkip address 192.168.66.1/24password zebra--On Thu, Aug 10, 2017 at 4:52 AM, Donald Sharp <sharpd@cumulusnetworks.com> wrote:Siddhesh -
Did you add the enable password and restart zebra?
donald
> ______________________________
On Wed, Aug 9, 2017 at 5:05 PM, $iddhe$h Divekar
<siddhesh.divekar@gmail.com> wrote:
> Hi All,
>
> I was successful in installing quaga and got it working fine.
> Then I decided to try frr.
>
> I followed all the instructions mentioned in the link below.
> https://github.com/FRRouting/frr/blob/master/doc/Building_FR R_on_Ubuntu1604.md
>
> Now when I try to telnet to zebra, it says "Vty password is not set".
>
> telnet localhost zebra
> Trying 127.0.0.1...
> Connected to localhost.
> Escape character is '^]'.
> Vty password is not set.
> Connection closed by foreign host.
>
> I have added following config to /etc/frr/zebra.conf
> but that is not helping.
>
> sudo cat /etc/frr/zebra.conf
> [sudo] password for sidhesh:
> ! Zebra configuration saved from vty
> ! 2002/02/28 01:46:12
> !
> hostname LinuxRouter
> password zebra
> enable password z3bRa
> log file /var/log/zebra/zebra.log
> !
> interface eth0
> description Interface to External Network
> ip address 10.0.0.1/24
> !
> interface eth1
> description Interface to Internal Network
> ip address 192.168.66.1/24
> password zebra
>
> How do I configure Vty password for zebra in frr.
>
> --
> -$iddhesh.
>
_________________
> dev mailing list
> dev@lists.frrouting.org
> https://lists.frrouting.org/listinfo/dev
>
-$iddhesh.