Hi all,

My name is Tamar and I have the release 5.0.1 of the FRRouting, it is an excellent  IP routing protocol suite!

I try to use frr in multicast traffic.

1) Is frr support multicast traffic? (I ask because I tried without success)

I write this commands:

ip multicast

ip pim rp IP ADDR

inteface INTERFACE

ip pim sm\\ in all interfaces

                Also I add an ospf:

                                router ospf 1

network 0.0.0.0 0.0.0.0 area 0

                my setup include tow PC and one additional router (VM of cisco)

                This setup does not foreword a multicast traffic unfortunately …

2) I try to debug the traffic in the frr with the “debug” commands but it does not print to the screen anything.

In the manual

When I wrote the command I got

Why?

3) Is the frr support pim protocol?
It is written in the manual but not work in my setup

I would be very grateful if you could help me with this.

Thank you!

Tamar

	Tamar Cohen NFV SW Engineer T: +972-73-270-7625 F: +972-08-6436791 | tamar_c@rad.com
www.rad.com |  Follow RAD on LinkedIn  |  Facebook | Twitter  |  YouTube