_______________________________________________Hi all,
My name is Tamar and I have the release 5.0.1 of the FRRouting, it is an excellent IP routing protocol suite!
I try to use frr in multicast traffic.
1) Is frr support multicast traffic? (I ask because I tried without success)
I write this commands:
ip multicast
ip pim rp IP ADDR
inteface INTERFACE
ip pim sm\\ in all interfaces
Also I add an ospf:
router ospf 1
network 0.0.0.0 0.0.0.0 area 0
my setup include tow PC and one additional router (VM of cisco)
This setup does not foreword a multicast traffic unfortunately …
2) I try to debug the traffic in the frr with the “debug” commands but it does not print to the screen anything.
In the manual
When I wrote the command I got
![]()
Why?
3) Is the frr support pim protocol?
It is written in the manual but not work in my setup
I would be very grateful if you could help me with this.
Thank you!
Tamar
Tamar Cohen
NFV SW Engineer
T: +972-73-270-7625
F: +972-08-6436791 | tamar_c@rad.com
www.rad.com | Follow RAD on LinkedIn | Facebook | Twitter | YouTube
frog mailing list
frog@lists.frrouting.org
https://lists.frrouting.org/listinfo/frog