Olivier - We've noticed that link-params creates allot of config lines when you configure any part of it. Would you mind if I change the behavior to this: When link-params is configured it auto starts displaying 6000-02# conf t dell-s6000-02(config)# int swp1 dell-s6000-02(config-if)# link-params dell-s6000-02(config-link-params)# admin-grp 0x12345678 dell-s6000-02(config-link-params)# end dell-s6000-02# show run interface swp1 link-params enable metric 0 <----Remove the metric and bw lines max-bw 1.25e+06 max-rsv-bw 1.25e+06 unrsv-bw 0 1.25e+06 unrsv-bw 1 1.25e+06 unrsv-bw 2 1.25e+06 unrsv-bw 3 1.25e+06 unrsv-bw 4 1.25e+06 unrsv-bw 5 1.25e+06 unrsv-bw 6 1.25e+06 unrsv-bw 7 1.25e+06 admin-grp 305419896 exit-link-params ! I'd like to reduce this to: interface swp1 link-params enable admin-grp 0x12345678 <----- Fix this to be what we entered exit-link-params ! Finally do we need to display the enable line as well? donald