Hi all, On Wed, Nov 30, 2016 at 3:26 PM, Lou Berger <lberger@labn.net> wrote:
router bgp AAA ! core instance
address-family vpnv4 | vpnv6 | evpn
Network <vpnv4> or <RT2/RT5> config [ rd <> ( could be used) ?]
neighbor ... ! PE session
vrf <VRFNAME1>
rt {import|export|both} RTLIST
rd {automatic|VALUE}
network <> [<rd>] ! <- most used hopefully
I had one question about network command under bgp vrf subnode. It does the same as if I was using network under address-family subnode. Right ? If yes, then I suppose that the BGP daemon can be configured with 2 addresses families. Let's suppose EVPN and VPNv4. So, does that mean that the command is applied to both families ?
For VRF's would we extend this to MAC VRF's also?
IMO yes (plus some additional EVPN info under the core instance and perhaps a new 'bridge|mac' statement at the same level as router ). Lou
From [EVPN - notes on the Cumulus implementation], I was wondering if it was possible to add vni subcommand under bgp vrf subnode. As mentioned by cumulus documentation, the RDs are formed as "RouterID:VNI" and the RTs (import and export) are formed using "AS:VNI". Having that command under VRF coud mean that with VNI, the RD and RT would be automatically set ?
Regards, Philippe