Hi Team, Want to know if SR TE is supported in the latest stable release of FRR. I can see few TE related CLIs like : mpls-te on under router ospf and other segment routing commands but not able to see the TE parameters being used. My config for device1 looked like below: router ospf ospf router-id 1.1.1.1 network 1.1.1.1/32 area 0 network 20.1.1.0/24 area 0 capability opaque mpls-te on mpls-te router-address 1.1.1.1 segment-routing on segment-routing global-block 10000 19999 segment-routing node-msd 8 segment-routing prefix 1.1.1.1/32 index 1100 no-php-flag router-info area I have installed required mpls kernel modules in the box but if I go and check mpls-te interface ,I see below: show ip ospf mpls-te interface eth0: MPLS-TE is disabled on this interface eth1: MPLS-TE is disabled on this interface eth2: MPLS-TE is disabled on this interface eth3: MPLS-TE is disabled on this interface lo: MPLS-TE is disabled on this interface Can anyone throw some light on how to make use of the TE parameters. Thanks, Shuvro