Hi Philippe,

Thanks for your inputs.

I am also interested in the use case of L3VPN/L2VPN for ODL-FRR interaction.

I would root for the approach mentioned by you in the first slide, of interfacing the zebra daemon for prefix handling, to ODL over gRPC.

Meanwhile, when are we planning to start with the bgpd specific north bound API related work ?

Is there any planned timeline for this feature request         #2585 - gRPC support for Zebra

Thanks

Anzal

On 19-12-2018 08:34 PM, Philippe Guibert wrote:
Hi Anzal,

About your question related to ODL-FRR interaction, may I know if you
have a specific ODL service in mind ?

I have come up with design proposals on ODL/FRR interaction for L3VPN
and L2VPN in ODL service.
Main points are:
- rely on the new yang NB API ( using GRPc technology).
- optional : extend L3VPN/L2VPN to Zebra, via remote dataplane

You can find specific proposal in [0]

Anzal, or everyone else in the FRR community,
your comments are welcome,

Thanks,

Philippe

[0] https://docs.google.com/presentation/d/18LkCGc8HAXto-c5IRT0NUBLmKRBYM6Oq6D5QNk_W-_k/edit#slide=id.g49ea94a8e7_0_0

On 11/21/18, Jeff Tantsura <jefftant@gmail.com> wrote:
Hi,

Netconf is a configuration protocol and is not particularly suitable for
streaming data, one could use
YANG-push(https://tools.ietf.org/html/draft-ietf-netconf-yang-push-20), has
been implemented in ODL’ Baron release
(https://docs.opendaylight.org/en/stable-boron/user-guide/yang-push.html)
however - general performance implications apply,
gRPC on another hand is de-facto industry standard for streaming telemetry
OpenConfig has defined number of frameworks.
Specifically for prefix injection, gRIBI
(https://github.com/openconfig/gribi/blob/master/doc/motivation.md) could be
considered, this what we (IETF) envisioned with I2RS effort but, reality is
different.

Cheers,
Jeff


On Nov 17, 2018, at 12:26 AM, Philippe Guibert
<philippe.guibert@6wind.com> wrote:

Hi Anzal,

I agree with your proposal, with some concerns however.

I presented a few weeks ago at FRR weekly meetings, some slides about
what would be the mechanisms involved for an SDN controller to be able
to use FRR as BGP speaker. ODL can be the target, obviously. See in
[0]

The yang solution applied to BGP northbound API has been proposed.

However, there were two remarks:
- on the data exchanged between SDN and FRR.
What was ok was for configuration ( BGP, VPN, BGP peers, ...), since
it fits well with BGP NB API.

However, at one moment, SDN had to populate the IPs information coming
from its VMs. The best solution was to use an other API plugged into
ZEBRA ( and not BGP), so that this IP information could be seen as a
remote dataplane. Here, the API is not well defined yet. Should this
API be equipped with Yang too?

- on the constraints between SDN and FRR. Some API require performance.
For instance, will yang fit well when SDN retrieves thousands of
prefix entries ?

Remember that if you use a netconf server like netopeer, the data flow
will look like the below:
odl client <---> netopeer server <---> sysrepo server <---> bgp/zebra
server

which may not be the optimised path when you want to retrieve a lot of
prefix entries. to be confirmed.

There is an alternative. From document [1], figure 2 depicts a new NB
API that bypasses sysrepo, and relies on scripts (it looks like a data
format ( gRPC with protoBuf) carried close to sysrepo bgp data
exchanges ( using protobuf) could be used to exchange with routing
daemons.
Because that path would bypass netopeer and sysrepo, while keeping a
data format close to what is done with netconf ( though not all would
be possible), retrieving prefix entries ( and why not configuration
too) could be optimised. Here too, that path has to be confirmed.
Which technology could suit well with FRR (also from licensing point
of view..).

Philippe

[0]
https://docs.google.com/presentation/d/194vUFaWxmhfTpHyANHsP66Ffw0BQuJ9sI0ir2jrXyXo/edit#slide=id.g4538793aa3_0_0
[1] https://github.com/opensourcerouting/frr/wiki/Architecture
On Thu, Nov 15, 2018 at 1:59 PM anzal <mohammedanz@gmail.com> wrote:
Hi

@Renato Westphal
"https://github.com/opensourcerouting/frr/wiki/Architecture"

Can this not be used to manage, configure and get updates from the FRR
routing daemons by an external NETCONF device, say an SDN controller ?

Like ODL has a south bound Netconf -
https://docs.opendaylight.org/en/stable-oxygen/user-guide/netconf-user-guide.html

So by using this I think ODL would be able to configure and get prefix
updates from the signalling daemons in FRR. Correct me if I am wrong
here.

Thanks

_______________________________________________
dev mailing list
dev@lists.frrouting.org
https://lists.frrouting.org/listinfo/dev
_______________________________________________
dev mailing list
dev@lists.frrouting.org
https://lists.frrouting.org/listinfo/dev

_______________________________________________
dev mailing list
dev@lists.frrouting.org
https://lists.frrouting.org/listinfo/dev