Hi Donald, I added the password which can be seen in zebra.conf below and restart frr using following commands. systemctl stop frr systemctl start frr sudo cat /etc/frr/zebra.conf [sudo] password for sidhesh: ! Zebra configuration saved from vty ! 2002/02/28 01:46:12 ! hostname LinuxRouter password zebra enable password z3bRa log file /var/log/zebra/zebra.log ! interface eth0 description Interface to External Network ip address 10.0.0.1/24 ! interface eth1 description Interface to Internal Network ip address 192.168.66.1/24 *password zebra* On Thu, Aug 10, 2017 at 4:52 AM, Donald Sharp <sharpd@cumulusnetworks.com> wrote:
Siddhesh -
Did you add the enable password and restart zebra?
donald
On Wed, Aug 9, 2017 at 5:05 PM, $iddhe$h Divekar <siddhesh.divekar@gmail.com> wrote:
Hi All,
I was successful in installing quaga and got it working fine. Then I decided to try frr.
I followed all the instructions mentioned in the link below. https://github.com/FRRouting/frr/blob/master/doc/Building_ FRR_on_Ubuntu1604.md
Now when I try to telnet to zebra, it says "Vty password is not set".
telnet localhost zebra Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Vty password is not set. Connection closed by foreign host.
I have added following config to /etc/frr/zebra.conf but that is not helping.
sudo cat /etc/frr/zebra.conf [sudo] password for sidhesh: ! Zebra configuration saved from vty ! 2002/02/28 01:46:12 ! hostname LinuxRouter password zebra enable password z3bRa log file /var/log/zebra/zebra.log ! interface eth0 description Interface to External Network ip address 10.0.0.1/24 ! interface eth1 description Interface to Internal Network ip address 192.168.66.1/24 password zebra
How do I configure Vty password for zebra in frr.
-- -$iddhesh.
_______________________________________________ dev mailing list dev@lists.frrouting.org https://lists.frrouting.org/listinfo/dev
-- -$iddhesh.