[cmaster-next] [PATCH] lib, zebra: Minimize display of link-params sub data
When link-params is configured it auto starts displaying 6000-02# conf t dell-s6000-02(config)# int swp1 dell-s6000-02(config-if)# link-params dell-s6000-02(config-link-params)# admin-grp 0x12345678 dell-s6000-02(config-link-params)# end dell-s6000-02# show run interface swp1 link-params enable metric 0 <----Remove the bw lines max-bw 1.25e+06 max-rsv-bw 1.25e+06 unrsv-bw 0 1.25e+06 unrsv-bw 1 1.25e+06 unrsv-bw 2 1.25e+06 unrsv-bw 3 1.25e+06 unrsv-bw 4 1.25e+06 unrsv-bw 5 1.25e+06 unrsv-bw 6 1.25e+06 unrsv-bw 7 1.25e+06 admin-grp 305419896 exit-link-params ! I'd like to reduce this to: interface enp0s3 ip igmp ip pim sm link-params enable admin-grp 0x12345678 <----- Fix this to be what we entered exit-link-params ! Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> --- lib/if.c | 10 +++++----- lib/if.h | 2 ++ zebra/interface.c | 17 +++++++++-------- 3 files changed, 16 insertions(+), 13 deletions(-) diff --git a/lib/if.c b/lib/if.c index 6ae8500..1987c05 100644 --- a/lib/if.c +++ b/lib/if.c @@ -1391,14 +1391,14 @@ if_link_params_get (struct interface *ifp) iflp->te_metric = ifp->metric; /* Compute default bandwidth based on interface */ - int bw = (float)((ifp->bandwidth ? ifp->bandwidth : DEFAULT_BANDWIDTH) - * TE_KILO_BIT / TE_BYTE); + iflp->default_bw = ((ifp->bandwidth ? ifp->bandwidth : DEFAULT_BANDWIDTH) + * TE_KILO_BIT / TE_BYTE); /* Set Max, Reservable and Unreserved Bandwidth */ - iflp->max_bw = bw; - iflp->max_rsv_bw = bw; + iflp->max_bw = iflp->default_bw; + iflp->max_rsv_bw = iflp->default_bw; for (i = 0; i < MAX_CLASS_TYPE; i++) - iflp->unrsv_bw[i] = bw; + iflp->unrsv_bw[i] = iflp->default_bw; /* Update Link parameters status */ iflp->lp_status = LP_TE | LP_MAX_BW | LP_MAX_RSV_BW | LP_UNRSV_BW; diff --git a/lib/if.h b/lib/if.h index 57062cd..f41a064 100644 --- a/lib/if.h +++ b/lib/if.h @@ -161,6 +161,7 @@ struct if_stats #define LP_RES_BW 0x0400 #define LP_AVA_BW 0x0800 #define LP_USE_BW 0x1000 +#define LP_TE_METRIC 0x2000 #define IS_PARAM_UNSET(lp, st) !(lp->lp_status & st) #define IS_PARAM_SET(lp, st) (lp->lp_status & st) @@ -174,6 +175,7 @@ struct if_stats struct if_link_params { u_int32_t lp_status; /* Status of Link Parameters: */ u_int32_t te_metric; /* Traffic Engineering metric */ + float default_bw; float max_bw; /* Maximum Bandwidth */ float max_rsv_bw; /* Maximum Reservable Bandwidth */ float unrsv_bw[MAX_CLASS_TYPE]; /* Unreserved Bandwidth per Class Type (8) */ diff --git a/zebra/interface.c b/zebra/interface.c index 6ffc0a6..f5eca4a 100644 --- a/zebra/interface.c +++ b/zebra/interface.c @@ -1931,7 +1931,7 @@ DEFUN (link_params_metric, VTY_GET_ULONG("metric", metric, argv[0]); /* Update TE metric if needed */ - link_param_cmd_set_uint32 (ifp, &iflp->te_metric, LP_TE, metric); + link_param_cmd_set_uint32 (ifp, &iflp->te_metric, LP_TE | LP_TE_METRIC, metric); return CMD_SUCCESS; } @@ -1945,7 +1945,7 @@ DEFUN (no_link_params_metric, VTY_DECLVAR_CONTEXT (interface, ifp); /* Unset TE Metric */ - link_param_cmd_unset(ifp, LP_TE); + link_param_cmd_unset(ifp, LP_TE | LP_TE_METRIC); return CMD_SUCCESS; } @@ -2873,20 +2873,21 @@ link_params_config_write (struct vty *vty, struct interface *ifp) vty_out (vty, " link-params%s", VTY_NEWLINE); vty_out(vty, " enable%s", VTY_NEWLINE); - if (IS_PARAM_SET(iflp, LP_TE)) + if (IS_PARAM_SET(iflp, LP_TE) && IS_PARAM_SET(iflp, LP_TE_METRIC)) vty_out(vty, " metric %u%s",iflp->te_metric, VTY_NEWLINE); - if (IS_PARAM_SET(iflp, LP_MAX_BW)) + if (IS_PARAM_SET(iflp, LP_MAX_BW) && iflp->max_bw != iflp->default_bw) vty_out(vty, " max-bw %g%s", iflp->max_bw, VTY_NEWLINE); - if (IS_PARAM_SET(iflp, LP_MAX_RSV_BW)) + if (IS_PARAM_SET(iflp, LP_MAX_RSV_BW) && iflp->max_rsv_bw != iflp->default_bw) vty_out(vty, " max-rsv-bw %g%s", iflp->max_rsv_bw, VTY_NEWLINE); if (IS_PARAM_SET(iflp, LP_UNRSV_BW)) { for (i = 0; i < 8; i++) - vty_out(vty, " unrsv-bw %d %g%s", - i, iflp->unrsv_bw[i], VTY_NEWLINE); + if (iflp->unrsv_bw[i] != iflp->default_bw) + vty_out(vty, " unrsv-bw %d %g%s", + i, iflp->unrsv_bw[i], VTY_NEWLINE); } if (IS_PARAM_SET(iflp, LP_ADM_GRP)) - vty_out(vty, " admin-grp %u%s", iflp->admin_grp, VTY_NEWLINE); + vty_out(vty, " admin-grp 0x%x%s", iflp->admin_grp, VTY_NEWLINE); if (IS_PARAM_SET(iflp, LP_DELAY)) { vty_out(vty, " delay %u", iflp->av_delay); -- 2.5.5
Applied this version of the patch. Olivier - the previous and current situation was/is that doing "no metric" makes the entire "link-params" block go away in show running-config. Is that intended? Wouldn't it make more sense to control the LP_TE flag by the "link-params" / "no link-params" statement itself? (If you want to change things around, please send a patch :) -David On Thu, Dec 01, 2016 at 10:49:22AM -0500, Donald Sharp wrote:
When link-params is configured it auto starts displaying 6000-02# conf t dell-s6000-02(config)# int swp1 dell-s6000-02(config-if)# link-params dell-s6000-02(config-link-params)# admin-grp 0x12345678 dell-s6000-02(config-link-params)# end dell-s6000-02# show run
interface swp1 link-params enable metric 0 <----Remove the bw lines max-bw 1.25e+06 max-rsv-bw 1.25e+06 unrsv-bw 0 1.25e+06 unrsv-bw 1 1.25e+06 unrsv-bw 2 1.25e+06 unrsv-bw 3 1.25e+06 unrsv-bw 4 1.25e+06 unrsv-bw 5 1.25e+06 unrsv-bw 6 1.25e+06 unrsv-bw 7 1.25e+06 admin-grp 305419896 exit-link-params !
I'd like to reduce this to:
interface enp0s3 ip igmp ip pim sm link-params enable admin-grp 0x12345678 <----- Fix this to be what we entered exit-link-params !
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> --- lib/if.c | 10 +++++----- lib/if.h | 2 ++ zebra/interface.c | 17 +++++++++-------- 3 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/lib/if.c b/lib/if.c index 6ae8500..1987c05 100644 --- a/lib/if.c +++ b/lib/if.c @@ -1391,14 +1391,14 @@ if_link_params_get (struct interface *ifp) iflp->te_metric = ifp->metric;
/* Compute default bandwidth based on interface */ - int bw = (float)((ifp->bandwidth ? ifp->bandwidth : DEFAULT_BANDWIDTH) - * TE_KILO_BIT / TE_BYTE); + iflp->default_bw = ((ifp->bandwidth ? ifp->bandwidth : DEFAULT_BANDWIDTH) + * TE_KILO_BIT / TE_BYTE);
/* Set Max, Reservable and Unreserved Bandwidth */ - iflp->max_bw = bw; - iflp->max_rsv_bw = bw; + iflp->max_bw = iflp->default_bw; + iflp->max_rsv_bw = iflp->default_bw; for (i = 0; i < MAX_CLASS_TYPE; i++) - iflp->unrsv_bw[i] = bw; + iflp->unrsv_bw[i] = iflp->default_bw;
/* Update Link parameters status */ iflp->lp_status = LP_TE | LP_MAX_BW | LP_MAX_RSV_BW | LP_UNRSV_BW; diff --git a/lib/if.h b/lib/if.h index 57062cd..f41a064 100644 --- a/lib/if.h +++ b/lib/if.h @@ -161,6 +161,7 @@ struct if_stats #define LP_RES_BW 0x0400 #define LP_AVA_BW 0x0800 #define LP_USE_BW 0x1000 +#define LP_TE_METRIC 0x2000
#define IS_PARAM_UNSET(lp, st) !(lp->lp_status & st) #define IS_PARAM_SET(lp, st) (lp->lp_status & st) @@ -174,6 +175,7 @@ struct if_stats struct if_link_params { u_int32_t lp_status; /* Status of Link Parameters: */ u_int32_t te_metric; /* Traffic Engineering metric */ + float default_bw; float max_bw; /* Maximum Bandwidth */ float max_rsv_bw; /* Maximum Reservable Bandwidth */ float unrsv_bw[MAX_CLASS_TYPE]; /* Unreserved Bandwidth per Class Type (8) */ diff --git a/zebra/interface.c b/zebra/interface.c index 6ffc0a6..f5eca4a 100644 --- a/zebra/interface.c +++ b/zebra/interface.c @@ -1931,7 +1931,7 @@ DEFUN (link_params_metric, VTY_GET_ULONG("metric", metric, argv[0]);
/* Update TE metric if needed */ - link_param_cmd_set_uint32 (ifp, &iflp->te_metric, LP_TE, metric); + link_param_cmd_set_uint32 (ifp, &iflp->te_metric, LP_TE | LP_TE_METRIC, metric);
return CMD_SUCCESS; } @@ -1945,7 +1945,7 @@ DEFUN (no_link_params_metric, VTY_DECLVAR_CONTEXT (interface, ifp);
/* Unset TE Metric */ - link_param_cmd_unset(ifp, LP_TE); + link_param_cmd_unset(ifp, LP_TE | LP_TE_METRIC);
return CMD_SUCCESS; } @@ -2873,20 +2873,21 @@ link_params_config_write (struct vty *vty, struct interface *ifp)
vty_out (vty, " link-params%s", VTY_NEWLINE); vty_out(vty, " enable%s", VTY_NEWLINE); - if (IS_PARAM_SET(iflp, LP_TE)) + if (IS_PARAM_SET(iflp, LP_TE) && IS_PARAM_SET(iflp, LP_TE_METRIC)) vty_out(vty, " metric %u%s",iflp->te_metric, VTY_NEWLINE); - if (IS_PARAM_SET(iflp, LP_MAX_BW)) + if (IS_PARAM_SET(iflp, LP_MAX_BW) && iflp->max_bw != iflp->default_bw) vty_out(vty, " max-bw %g%s", iflp->max_bw, VTY_NEWLINE); - if (IS_PARAM_SET(iflp, LP_MAX_RSV_BW)) + if (IS_PARAM_SET(iflp, LP_MAX_RSV_BW) && iflp->max_rsv_bw != iflp->default_bw) vty_out(vty, " max-rsv-bw %g%s", iflp->max_rsv_bw, VTY_NEWLINE); if (IS_PARAM_SET(iflp, LP_UNRSV_BW)) { for (i = 0; i < 8; i++) - vty_out(vty, " unrsv-bw %d %g%s", - i, iflp->unrsv_bw[i], VTY_NEWLINE); + if (iflp->unrsv_bw[i] != iflp->default_bw) + vty_out(vty, " unrsv-bw %d %g%s", + i, iflp->unrsv_bw[i], VTY_NEWLINE); } if (IS_PARAM_SET(iflp, LP_ADM_GRP)) - vty_out(vty, " admin-grp %u%s", iflp->admin_grp, VTY_NEWLINE); + vty_out(vty, " admin-grp 0x%x%s", iflp->admin_grp, VTY_NEWLINE); if (IS_PARAM_SET(iflp, LP_DELAY)) { vty_out(vty, " delay %u", iflp->av_delay); -- 2.5.5
_______________________________________________ cmaster-next mailing list cmaster-next@lists.nox.tf https://lists.nox.tf/listinfo/cmaster-next
Hello David, It is not the correct way to activate / deactivate Link-Params. I'm currently out of my office all this week. I'll look to the problem and try to reproduce it if I found an access to my lab and propose a patch. What is the deadline ? Is next Monday is acceptable for you ? Regards Olivier Le 05/12/2016 à 16:16, David Lamparter a écrit :
Applied this version of the patch.
Olivier - the previous and current situation was/is that doing "no metric" makes the entire "link-params" block go away in show running-config. Is that intended? Wouldn't it make more sense to control the LP_TE flag by the "link-params" / "no link-params" statement itself?
(If you want to change things around, please send a patch :)
-David
On Thu, Dec 01, 2016 at 10:49:22AM -0500, Donald Sharp wrote:
When link-params is configured it auto starts displaying 6000-02# conf t dell-s6000-02(config)# int swp1 dell-s6000-02(config-if)# link-params dell-s6000-02(config-link-params)# admin-grp 0x12345678 dell-s6000-02(config-link-params)# end dell-s6000-02# show run
interface swp1 link-params enable metric 0 <----Remove the bw lines max-bw 1.25e+06 max-rsv-bw 1.25e+06 unrsv-bw 0 1.25e+06 unrsv-bw 1 1.25e+06 unrsv-bw 2 1.25e+06 unrsv-bw 3 1.25e+06 unrsv-bw 4 1.25e+06 unrsv-bw 5 1.25e+06 unrsv-bw 6 1.25e+06 unrsv-bw 7 1.25e+06 admin-grp 305419896 exit-link-params !
I'd like to reduce this to:
interface enp0s3 ip igmp ip pim sm link-params enable admin-grp 0x12345678 <----- Fix this to be what we entered exit-link-params !
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> --- lib/if.c | 10 +++++----- lib/if.h | 2 ++ zebra/interface.c | 17 +++++++++-------- 3 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/lib/if.c b/lib/if.c index 6ae8500..1987c05 100644 --- a/lib/if.c +++ b/lib/if.c @@ -1391,14 +1391,14 @@ if_link_params_get (struct interface *ifp) iflp->te_metric = ifp->metric;
/* Compute default bandwidth based on interface */ - int bw = (float)((ifp->bandwidth ? ifp->bandwidth : DEFAULT_BANDWIDTH) - * TE_KILO_BIT / TE_BYTE); + iflp->default_bw = ((ifp->bandwidth ? ifp->bandwidth : DEFAULT_BANDWIDTH) + * TE_KILO_BIT / TE_BYTE);
/* Set Max, Reservable and Unreserved Bandwidth */ - iflp->max_bw = bw; - iflp->max_rsv_bw = bw; + iflp->max_bw = iflp->default_bw; + iflp->max_rsv_bw = iflp->default_bw; for (i = 0; i < MAX_CLASS_TYPE; i++) - iflp->unrsv_bw[i] = bw; + iflp->unrsv_bw[i] = iflp->default_bw;
/* Update Link parameters status */ iflp->lp_status = LP_TE | LP_MAX_BW | LP_MAX_RSV_BW | LP_UNRSV_BW; diff --git a/lib/if.h b/lib/if.h index 57062cd..f41a064 100644 --- a/lib/if.h +++ b/lib/if.h @@ -161,6 +161,7 @@ struct if_stats #define LP_RES_BW 0x0400 #define LP_AVA_BW 0x0800 #define LP_USE_BW 0x1000 +#define LP_TE_METRIC 0x2000
#define IS_PARAM_UNSET(lp, st) !(lp->lp_status & st) #define IS_PARAM_SET(lp, st) (lp->lp_status & st) @@ -174,6 +175,7 @@ struct if_stats struct if_link_params { u_int32_t lp_status; /* Status of Link Parameters: */ u_int32_t te_metric; /* Traffic Engineering metric */ + float default_bw; float max_bw; /* Maximum Bandwidth */ float max_rsv_bw; /* Maximum Reservable Bandwidth */ float unrsv_bw[MAX_CLASS_TYPE]; /* Unreserved Bandwidth per Class Type (8) */ diff --git a/zebra/interface.c b/zebra/interface.c index 6ffc0a6..f5eca4a 100644 --- a/zebra/interface.c +++ b/zebra/interface.c @@ -1931,7 +1931,7 @@ DEFUN (link_params_metric, VTY_GET_ULONG("metric", metric, argv[0]);
/* Update TE metric if needed */ - link_param_cmd_set_uint32 (ifp, &iflp->te_metric, LP_TE, metric); + link_param_cmd_set_uint32 (ifp, &iflp->te_metric, LP_TE | LP_TE_METRIC, metric);
return CMD_SUCCESS; } @@ -1945,7 +1945,7 @@ DEFUN (no_link_params_metric, VTY_DECLVAR_CONTEXT (interface, ifp);
/* Unset TE Metric */ - link_param_cmd_unset(ifp, LP_TE); + link_param_cmd_unset(ifp, LP_TE | LP_TE_METRIC);
return CMD_SUCCESS; } @@ -2873,20 +2873,21 @@ link_params_config_write (struct vty *vty, struct interface *ifp)
vty_out (vty, " link-params%s", VTY_NEWLINE); vty_out(vty, " enable%s", VTY_NEWLINE); - if (IS_PARAM_SET(iflp, LP_TE)) + if (IS_PARAM_SET(iflp, LP_TE) && IS_PARAM_SET(iflp, LP_TE_METRIC)) vty_out(vty, " metric %u%s",iflp->te_metric, VTY_NEWLINE); - if (IS_PARAM_SET(iflp, LP_MAX_BW)) + if (IS_PARAM_SET(iflp, LP_MAX_BW) && iflp->max_bw != iflp->default_bw) vty_out(vty, " max-bw %g%s", iflp->max_bw, VTY_NEWLINE); - if (IS_PARAM_SET(iflp, LP_MAX_RSV_BW)) + if (IS_PARAM_SET(iflp, LP_MAX_RSV_BW) && iflp->max_rsv_bw != iflp->default_bw) vty_out(vty, " max-rsv-bw %g%s", iflp->max_rsv_bw, VTY_NEWLINE); if (IS_PARAM_SET(iflp, LP_UNRSV_BW)) { for (i = 0; i < 8; i++) - vty_out(vty, " unrsv-bw %d %g%s", - i, iflp->unrsv_bw[i], VTY_NEWLINE); + if (iflp->unrsv_bw[i] != iflp->default_bw) + vty_out(vty, " unrsv-bw %d %g%s", + i, iflp->unrsv_bw[i], VTY_NEWLINE); } if (IS_PARAM_SET(iflp, LP_ADM_GRP)) - vty_out(vty, " admin-grp %u%s", iflp->admin_grp, VTY_NEWLINE); + vty_out(vty, " admin-grp 0x%x%s", iflp->admin_grp, VTY_NEWLINE); if (IS_PARAM_SET(iflp, LP_DELAY)) { vty_out(vty, " delay %u", iflp->av_delay); -- 2.5.5
_______________________________________________ cmaster-next mailing list cmaster-next@lists.nox.tf https://lists.nox.tf/listinfo/cmaster-next
-- logo Orange <http://www.orange.com> Olivier Dugeon Senior research engineer in QoS and network control Open Source Referent Orange/IMT/OLN/WTC/IEE/OPEN fixe : +33 2 96 07 28 80 mobile : +33 6 82 90 37 85 olivier.dugeon@orange.com <mailto:olivier.dugeon@orange.com>
Hi David, Donald, I check the behaviour of latest FRR code. For me, it working as expected. Setting at least one of the TE parameters under the link-params statement automatically set enable under the link-params node. "no metric" command doesn't deactivate the link-params: "no enable" do the job. Controlling LP flags with "link-params" / "no link-params" is not feasible as link-params is a node in the CLI. BTW, there is some redundancy between LP_TE and LP_TE_METRIC flags. LP_TE is not necessary to determine is link-params is set or not. My original intention was to control LP by testing if "lp_status" is equal to 0 or not. This is the role of IS_LINK_PARAM_SET macro. Patch follow to rationalize LP flags by removing LP_TE and use only LP_TE_METRIC. Regards Olivier Le 05/12/2016 à 16:16, David Lamparter a écrit :
Applied this version of the patch.
Olivier - the previous and current situation was/is that doing "no metric" makes the entire "link-params" block go away in show running-config. Is that intended? Wouldn't it make more sense to control the LP_TE flag by the "link-params" / "no link-params" statement itself?
(If you want to change things around, please send a patch :)
-David
On Thu, Dec 01, 2016 at 10:49:22AM -0500, Donald Sharp wrote:
When link-params is configured it auto starts displaying 6000-02# conf t dell-s6000-02(config)# int swp1 dell-s6000-02(config-if)# link-params dell-s6000-02(config-link-params)# admin-grp 0x12345678 dell-s6000-02(config-link-params)# end dell-s6000-02# show run
interface swp1 link-params enable metric 0 <----Remove the bw lines max-bw 1.25e+06 max-rsv-bw 1.25e+06 unrsv-bw 0 1.25e+06 unrsv-bw 1 1.25e+06 unrsv-bw 2 1.25e+06 unrsv-bw 3 1.25e+06 unrsv-bw 4 1.25e+06 unrsv-bw 5 1.25e+06 unrsv-bw 6 1.25e+06 unrsv-bw 7 1.25e+06 admin-grp 305419896 exit-link-params !
I'd like to reduce this to:
interface enp0s3 ip igmp ip pim sm link-params enable admin-grp 0x12345678 <----- Fix this to be what we entered exit-link-params !
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> --- lib/if.c | 10 +++++----- lib/if.h | 2 ++ zebra/interface.c | 17 +++++++++-------- 3 files changed, 16 insertions(+), 13 deletions(-)
diff --git a/lib/if.c b/lib/if.c index 6ae8500..1987c05 100644 --- a/lib/if.c +++ b/lib/if.c @@ -1391,14 +1391,14 @@ if_link_params_get (struct interface *ifp) iflp->te_metric = ifp->metric;
/* Compute default bandwidth based on interface */ - int bw = (float)((ifp->bandwidth ? ifp->bandwidth : DEFAULT_BANDWIDTH) - * TE_KILO_BIT / TE_BYTE); + iflp->default_bw = ((ifp->bandwidth ? ifp->bandwidth : DEFAULT_BANDWIDTH) + * TE_KILO_BIT / TE_BYTE);
/* Set Max, Reservable and Unreserved Bandwidth */ - iflp->max_bw = bw; - iflp->max_rsv_bw = bw; + iflp->max_bw = iflp->default_bw; + iflp->max_rsv_bw = iflp->default_bw; for (i = 0; i < MAX_CLASS_TYPE; i++) - iflp->unrsv_bw[i] = bw; + iflp->unrsv_bw[i] = iflp->default_bw;
/* Update Link parameters status */ iflp->lp_status = LP_TE | LP_MAX_BW | LP_MAX_RSV_BW | LP_UNRSV_BW; diff --git a/lib/if.h b/lib/if.h index 57062cd..f41a064 100644 --- a/lib/if.h +++ b/lib/if.h @@ -161,6 +161,7 @@ struct if_stats #define LP_RES_BW 0x0400 #define LP_AVA_BW 0x0800 #define LP_USE_BW 0x1000 +#define LP_TE_METRIC 0x2000
#define IS_PARAM_UNSET(lp, st) !(lp->lp_status & st) #define IS_PARAM_SET(lp, st) (lp->lp_status & st) @@ -174,6 +175,7 @@ struct if_stats struct if_link_params { u_int32_t lp_status; /* Status of Link Parameters: */ u_int32_t te_metric; /* Traffic Engineering metric */ + float default_bw; float max_bw; /* Maximum Bandwidth */ float max_rsv_bw; /* Maximum Reservable Bandwidth */ float unrsv_bw[MAX_CLASS_TYPE]; /* Unreserved Bandwidth per Class Type (8) */ diff --git a/zebra/interface.c b/zebra/interface.c index 6ffc0a6..f5eca4a 100644 --- a/zebra/interface.c +++ b/zebra/interface.c @@ -1931,7 +1931,7 @@ DEFUN (link_params_metric, VTY_GET_ULONG("metric", metric, argv[0]);
/* Update TE metric if needed */ - link_param_cmd_set_uint32 (ifp, &iflp->te_metric, LP_TE, metric); + link_param_cmd_set_uint32 (ifp, &iflp->te_metric, LP_TE | LP_TE_METRIC, metric);
return CMD_SUCCESS; } @@ -1945,7 +1945,7 @@ DEFUN (no_link_params_metric, VTY_DECLVAR_CONTEXT (interface, ifp);
/* Unset TE Metric */ - link_param_cmd_unset(ifp, LP_TE); + link_param_cmd_unset(ifp, LP_TE | LP_TE_METRIC);
return CMD_SUCCESS; } @@ -2873,20 +2873,21 @@ link_params_config_write (struct vty *vty, struct interface *ifp)
vty_out (vty, " link-params%s", VTY_NEWLINE); vty_out(vty, " enable%s", VTY_NEWLINE); - if (IS_PARAM_SET(iflp, LP_TE)) + if (IS_PARAM_SET(iflp, LP_TE) && IS_PARAM_SET(iflp, LP_TE_METRIC)) vty_out(vty, " metric %u%s",iflp->te_metric, VTY_NEWLINE); - if (IS_PARAM_SET(iflp, LP_MAX_BW)) + if (IS_PARAM_SET(iflp, LP_MAX_BW) && iflp->max_bw != iflp->default_bw) vty_out(vty, " max-bw %g%s", iflp->max_bw, VTY_NEWLINE); - if (IS_PARAM_SET(iflp, LP_MAX_RSV_BW)) + if (IS_PARAM_SET(iflp, LP_MAX_RSV_BW) && iflp->max_rsv_bw != iflp->default_bw) vty_out(vty, " max-rsv-bw %g%s", iflp->max_rsv_bw, VTY_NEWLINE); if (IS_PARAM_SET(iflp, LP_UNRSV_BW)) { for (i = 0; i < 8; i++) - vty_out(vty, " unrsv-bw %d %g%s", - i, iflp->unrsv_bw[i], VTY_NEWLINE); + if (iflp->unrsv_bw[i] != iflp->default_bw) + vty_out(vty, " unrsv-bw %d %g%s", + i, iflp->unrsv_bw[i], VTY_NEWLINE); } if (IS_PARAM_SET(iflp, LP_ADM_GRP)) - vty_out(vty, " admin-grp %u%s", iflp->admin_grp, VTY_NEWLINE); + vty_out(vty, " admin-grp 0x%x%s", iflp->admin_grp, VTY_NEWLINE); if (IS_PARAM_SET(iflp, LP_DELAY)) { vty_out(vty, " delay %u", iflp->av_delay); -- 2.5.5
_______________________________________________ cmaster-next mailing list cmaster-next@lists.nox.tf https://lists.nox.tf/listinfo/cmaster-next
_________________________________________________________________________________________________________________________ Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci. This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified. Thank you.
participants (4)
-
David Lamparter -
Donald Sharp -
Olivier Dugeon -
olivier.dugeon＠orange.com