On 17/09/2020 05:44, Pankaj Garbyal wrote:

I am using FRRRouting Release 5.1 for PIM Protocol support in my Switch. But I find that PIM Protocol is not acknowledging the multicast packets coming towards it. When i compared the same with FRR installed in Linux PC, i found that a new interface named "pimreg" is enabled by FRR but the same is not happening in FRR of my switch. Kindly provide me help to get the pimreg interface option in my switch through FRR. also provide some information on the role of "pimreg" to run the PIM Protocol at FRR. Attached here my quagga build file for your reference. Thank you in advance for your support.

Pankaj Garbyal

Have you checked the observed behaviour with the documentation relevant for 5.1 [0]? What is the version of frr you are running "in linux pc"? [0]: https://docs.frrouting.org/en/stable-5.0/ [1]: https://docs.frrouting.org/en/stable-6.0/ [2]: https://docs.frrouting.org/en/stable-7.0/ [3]: https://docs.frrouting.org/en/stable-7.1/ [4]: https://docs.frrouting.org/en/stable-7.2/ [5]: https://docs.frrouting.org/en/latest/