Hi Rendo, You need to enable type-5 route advertisement. Please find an example below. The CLI in red will do the trick. router bgp <> vrf <> address-family l2vpn evpn advertise ipv4 unicast exit-address-family end For reference yo could follow: https://docs.cumulusnetworks.com/display/DOCS/Ethernet+Virtual+Private+Netwo... On Tue, Jan 16, 2018 at 2:02 PM, rendo <rendo.aw@gmail.com> wrote:
Hi Donald,
Thanks for the update and thanks for everyone involved to make this happen.
Out of my curiosity, I did a quick test, and evpn type 2 looks very good, both control plane and data plane works as expected. For type 5, i can see my FRR is able to receive the prefix, but i could not find a way to advertise my local prefix as type 5. Please let me know if you have any doc/pointer for this.
Thanks.
rendo
On Sat, Jan 13, 2018 at 8:05 AM, Donald Sharp <sharpd@cumulusnetworks.com> wrote:
All -
EVPN control plane in FRR is now enhanced so that it supports both asymmetric and symmetric routing models. Prefix-based routing is also supported using EVPN type-5 routes. Also, with all routing models, L3 multi-tenancy is inherently supported
I'd like to thank Mitesh for his hard work getting this done!
thanks!
donald
_______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog
-- Regards, Mitesh