Hello, I am playing around with FRR and EVPN. My setup is very simple, I have two virtual machines running Linux, which are connected back to back and are called border leaf and normal leaf. I have compiled FRR from git head with the option --enable-cumulus. Type 2,3,5 routes are working in a symmetric routing environment. Now I want to inject a default route from the border leaf, which should be a type 5 route and it should be written down to the vrf of the normal leaf. But the documentation is a bit sparse, according to the cumulus docs it should go into the vrf part of the bgp configuration: —snip— switch(config)# router bgp 650030 vrf vrf1 switch(config-router)# address-family l2vpn evpn switch(config-router-af)# default-originate ipv4 switch(config-router-af)# default-originate ipv6 switch(config-router-af)# exit switch(config-router)# exit switch(config)# exit switch# write memory —snap— source: https://docs.cumulusnetworks.com/display/DOCS/Ethernet+Virtual+Private+Netwo... But with this configuration I do not see any default type 5 routes in the RIB. If I put the statements "default-originate ipv(4|6)“ into the main bgp section I get routes in the RIB. But I do not know how to read the RD (as2 0:0) And the two default routes are not in the VRF FIB either. Border leaf RIB: show bgp l2vpn evpn Route Distinguisher: as2 0:0 *> [5]:[0]:[0]:[0.0.0.0] 0.0.0.0 32768 i *> [5]:[0]:[0]:[::] 0.0.0.0 32768 i Normal leaf RIB: Route Distinguisher: as2 0:0 *>i[5]:[0]:[0]:[0.0.0.0] 192.168.0.3 100 0 i *>i[5]:[0]:[0]:[::] 192.168.0.3 100 0 i Any hint would be appreciated to get it up and running. Thanks for your time. Best regards, martin Here the two configs. border leaf: vrf vrf1 vni 8000 ! # VRF1 router bgp 1234 vrf vrf1 ! bgp router-id 192.168.10.3 ! address-family ipv4 unicast redistribute connected exit-address-family ! address-family ipv6 unicast redistribute connected exit-address-family ! address-family l2vpn evpn advertise ipv4 unicast advertise ipv6 unicast # should be here according to the cumulus docs # default-originate ipv4 # default-originate ipv6 exit-address-family ! ## Global router bgp 1234 bgp router-id 192.168.10.3 neighbor 192.168.0.4 remote-as 1234 #redistribute connected route-map loopbacks network 192.168.10.3/32 ! address-family l2vpn evpn neighbor 192.168.0.4 activate advertise-all-vni default-originate ipv4 default-originate ipv6 exit-address-family ! route-map loopbacks permit 10 match interface lo ! Normal leaf: vrf vrf1 vni 8000 ! # VRF1 router bgp 1234 vrf vrf1 ! bgp router-id 192.168.10.4 ! address-family ipv4 unicast redistribute connected exit-address-family ! address-family ipv6 unicast redistribute connected exit-address-family ! address-family l2vpn evpn advertise ipv4 unicast advertise ipv6 unicast exit-address-family ! # Global router bgp 1234 bgp router-id 192.168.10.4 neighbor 192.168.0.3 remote-as 1234 # redistribute connected route-map loopback network 192.168.10.4/32 ! address-family l2vpn evpn neighbor 192.168.0.3 activate advertise-all-vni exit-address-family ! route-map loopbacks permit 10 match interface lo !