Greetings- I'm attempting to use FRR 7.5.1 running on Debian 11.1 in a lab environment to simulate an upstream BGP peer to other network devices. I wrote a quick shell script to generate all of the /24s in IPv4 address space and have tried loading these into FRR two different ways: a) Writing all static route config directives to a separate config file, then loading that config live using "vtysh -f /tmp/nets" b) Appending the static route config directives to my existing /etc/frr/frr.conf file and restarting the frr service Both options fail to load routes after the first few thousand or so ( 1.0.0.0/24 through 1.4.238.0/24, none further). The logs don't indicate any problems or cause for the failure to load additional routes. The system has plenty of resources so I don't expect this to be a memory problem. Thoughts on what I could be doing wrong and suggestions on how to accomplish this? Thanks! --Tim