On 10/11/19 9:15 AM, Donald Sharp wrote:
Rudy -
Would you mind subscribing to `frog`. It's a pain in the whumple-lump to approve your posts every time.
No problem, I didn't see the subscribe location until the first email went through. I couldn't find a Mailman link here: http://docs.frrouting.org/en/latest/overview.html#mailing-lists
What is the output of `show int brief`?
cc0 down default cc1 down default cxl0 down default cxl1 up default 208.69.43.190/30 + 2607:f598:b010:f010::2/64 cxl2 up default 208.69.43.146/30 + 2607:f598:b000:f003::2/64 cxl3 up default 208.69.43.129/30 + 2607:f598:bc10:72::2/64 cxl4 down default cxl5 up default 206.197.187.13/24 + 2001:504:30::ba03:2329:1/64 cxl6 down default cxl7 down default ipfw0 down default ixl0 up default ixl1 down default lo0 up default 208.69.43.198/32 208.69.43.199/32 + 2607:f598:0:dadf::1/64 usbus0 down default usbus1 down default usbus2 down default usbus3 down default usbus4 down default usbus5 down default usbus6 down default usbus7 down default This box is a replacement for our old qugga box, and I'm excited about the 100Gbps ports from the chelsio card. As soon as this is stabilized, I'm going to start upgrading uplinks! Rudy
donald
On Fri, Oct 11, 2019 at 12:11 PM Rudy Rucker <rudy@monkeybrains.net> wrote:
Same libs as yours...
/usr/local/sbin/ospf6d: libfrr.so.0 => /usr/local/lib/libfrr.so.0 (0x800295000) libyang.so.0.16 => /usr/local/lib/libyang.so.0.16 (0x80036c000) libexecinfo.so.1 => /usr/lib/libexecinfo.so.1 (0x800466000) libm.so.5 => /lib/libm.so.5 (0x80046b000) libcrypt.so.5 => /lib/libcrypt.so.5 (0x80049d000) libjson-c.so.4 => /usr/local/lib/libjson-c.so.4 (0x8004be000) librt.so.1 => /usr/lib/librt.so.1 (0x8004d1000) libthr.so.3 => /lib/libthr.so.3 (0x8004d9000) libc.so.7 => /lib/libc.so.7 (0x800506000) libpcre.so.1 => /usr/local/lib/libpcre.so.1 (0x8008fe000) libelf.so.2 => /lib/libelf.so.2 (0x8009a2000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x8009bd000)
Note: I was having issues with 12.0-RELEASE and the binary distribution (pkg install frr7), so I recompiled to 12.1-FreeBSD and built frr7 from the ports. No optimization flags.
Still crashes. :(
What is interesting, if I just put lo0 in area 0, it doesn't crash. When I get routes (by adding real interfaces), it crashes.
Backtrace is in 'hash_get'. Could I have a "bad" IPv6 route that when ospf6d tries to learn it, it crashes?
#0 0x000000080030678c in hash_get () from /usr/local/lib/libfrr.so.0
I'm looking in hash.c, but my C skills are about 20 years rusty.
Rudy
On 10/11/19 8:52 AM, mike tancsa wrote:
On 10/11/2019 2:37 AM, Rudy Rucker wrote:
I just upgraded from FreeBSD 11 to 12 and upgrade from quagga to FRR at the same time. bgpd and ospfd work fine, but ospf6 doesn't work. Not sure what I'm going wrong. Here is the output from zebra and ospf6.
If you do
ldd ospf6d ospf6d: libfrr.so.0 => /usr/local/lib/libfrr.so.0 (0x80086d000) libyang.so.0.16 => /usr/local/lib/libyang.so.0.16 (0x800b3e000) libexecinfo.so.1 => /usr/lib/libexecinfo.so.1 (0x800e35000) libm.so.5 => /lib/libm.so.5 (0x801038000) libcrypt.so.5 => /lib/libcrypt.so.5 (0x801268000) libjson-c.so.4 => /usr/local/lib/libjson-c.so.4 (0x801487000) librt.so.1 => /usr/lib/librt.so.1 (0x801697000) libthr.so.3 => /lib/libthr.so.3 (0x80189d000) libc.so.7 => /lib/libc.so.7 (0x801ac6000) libpcre.so.1 => /usr/local/lib/libpcre.so.1 (0x801e81000) libelf.so.2 => /lib/libelf.so.2 (0x802123000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x80233b000)
is it linked to anything odd or old by chance ? (libmap.conf?)
---Mike
_______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog