Thanks Donald, and sorry for the late response.  I am just getting back to this.  I found this in the documentation:

Configuration for the daemon should be saved in the FRR integrated configuration file located in /etc/frr/frr.conf, see Integrated Config File for more information on system configuration.

Prior versions of FRR supported reading and writing per-daemon config files; however, with the introduction of the centralized management daemon mgmtd this could no longer be supported.

The interesting thing is it did seem to read my zebra.conf, but completely skipped the bgpd.conf.  So I tried copying the contents of the bgpd.conf into frr.conf and the daemon starts, and doing a show run it looks pretty identical to quagga system side by side with a few caveates (hostname for instance shows up twice with 2 different values).  But, I'm not getting the advertised routes from remote.  The logs are showing me this.  So it sees them, but something is missing that wasn't needed in quagga.  

2024/05/22 23:04:45 BGP: [RZMGQ-A03CG] 169.254.244.13(Unknown) rcvd UPDATE about 10.0.0.0/8 IPv4 unicast -- DENIED due to: inbound policy missing

2024/05/22 23:04:45 BGP: [RZMGQ-A03CG] 169.254.244.13(Unknown) rcvd UPDATE about 192.168.0.0/16 IPv4 unicast -- DENIED due to: inbound policy missing

2024/05/22 23:04:45 BGP: [RZMGQ-A03CG] 169.254.244.13(Unknown) rcvd UPDATE about 172.16.0.0/12 IPv4 unicast -- DENIED due to: inbound policy missing

I've been reading for a while now but not finding an resolution.

Doug Tucker

---

From: Donald Sharp <donaldsharp72@gmail.com>
Sent: Wednesday, April 17, 2024 2:35 PM
To: Doug Tucker <doug.tucker@navigaglobal.com>
Cc: frog@lists.frrouting.org <frog@lists.frrouting.org>
Subject: Re: [FROG] Migration scripts for FRR from Quagga

 

You don't often get email from donaldsharp72@gmail.com. Learn why this is important

Naviga WARNING: External email. Please verify sender before opening attachments or clicking on links.

In general you should just be able to use the Quagga configs directly in FRR(There are a couple caveats of course ).  I am not aware of any conversion/migration scripts though.  Have you tried just loading the config and seeing what happens? Then comparing a show run to the saved config?

donald

On Wed, Apr 17, 2024 at 4:29 PM Doug Tucker via frog <frog@lists.frrouting.org> wrote:

---------- Forwarded message ----------
From: Doug Tucker <doug.tucker@navigaglobal.com>
To: "frog@lists.frrouting.org" <frog@lists.frrouting.org>
Cc: 
Bcc: 
Date: Wed, 17 Apr 2024 19:23:33 +0000
Subject: Migration scripts for FRR from Quagga

I am needing to undertake migrating from all of my quagga instances to frr.  I have read through the general documentation but before I started from scratch I thought I would see if there were some migration/conversion scripts available for existing quagga installations.  Thank you for your assistance.

Doug Tucker

---------- Forwarded message ----------
From: Doug Tucker via frog <frog@lists.frrouting.org>
To: "frog@lists.frrouting.org" <frog@lists.frrouting.org>
Cc: 
Bcc: 
Date: Wed, 17 Apr 2024 19:23:33 +0000
Subject: [FROG] Migration scripts for FRR from Quagga
_______________________________________________
frog mailing list
frog@lists.frrouting.org
https://lists.frrouting.org/listinfo/frog