Thanks Donald was missing one line. Now moving on to why my eBGP CE route is "inaccessible" when it's next-hop seems fine :/ On Tue, 26 Feb 2019 at 13:25, Donald Sharp <sharpd@cumulusnetworks.com> wrote:
Mark -
Take a look at `tests/topotests/bgp_l3vpn_to_bgp_vrf` as an example vpn setup.
donald
On Mon, Feb 25, 2019 at 9:07 PM Mark Tees <marktees@gmail.com> wrote:
Hi there,
Does anyone have a full MPLS layer 3 VPN example I can test out?
Also, which version I should try with.
I have tried with FRR 6.0 and can see routes under the VRF like below:
ord-b457489f5df65f1f# show bgp vrf vrf2 ipv4 </snip>
Network Next Hop Metric LocPrf Weight Path *> 5.5.5.1/32 0.0.0.0 0 32768 ? *> 10.13.12.0/30 0.0.0.0 0 32768 ?
However I can't see them in the main vpn table or sent to vpn peers.
ord-b457489f5df65f1f# show bgp ipv4 vpn No BGP prefixes displayed, 0 exist
Have tried with rt/rd/label config under vrf-policy in 'router bgp xxxx' and also under 'router xxxx vrf vrf2'.
redistribute connected redistribute static label vpn export 34712 rd vpn export 10.12.12.1:100 nexthop vpn export 10.12.12.1 rt vpn both 45437:100
I followed the Linux VRF instructions for setting up VRF and that appears ok.
Any ideas are welcome.
Cheers,
Mark
_______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog
-- Regards, Mark L. Tees