Hi Donald, Copy paste works fine. If I connect to bgpd unix vty socket and try to send commands then it fail. I suspect below is the code which causes it to fail. Here is the code path. bgp_redistribute_set -> bgp_install_info_to_zebra #define IS_BGP_INST_KNOWN_TO_ZEBRA(bgp) \ | (bgp->inst_type == BGP_INSTANCE_TYPE_DEFAULT \ | || (bgp->inst_type == BGP_INSTANCE_TYPE_VRF \ | && *bgp->vrf_id != VRF_UNKNOWN*)) On Mon, Oct 23, 2017 at 5:12 AM, Donald Sharp <sharpd@cumulusnetworks.com> wrote:
Siddhesh -
This works for me: dell-s6000-02# conf t dell-s6000-02(config)# exit dell-s6000-02# configure terminal dell-s6000-02(config)# router bgp 1234 vrf foo dell-s6000-02(config-router)# neighbor 2.2.2.2 remote-as 3456 dell-s6000-02(config-router)# neighbor 2.2.2.2 shutdown dell-s6000-02(config-router)# address-family ipv6 unicast dell-s6000-02(config-router-af)# redistribute connected dell-s6000-02(config-router-af)# exit-address-family dell-s6000-02(config-router)# address-family ipv6 unicast dell-s6000-02(config-router-af)# redistribute static dell-s6000-02(config-router-af)# exit-address-family dell-s6000-02(config-router)# address-family ipv4 unicast dell-s6000-02(config-router-af)# redistribute connected dell-s6000-02(config-router-af)# exit-address-family dell-s6000-02(config-router)# address-family ipv4 unicast dell-s6000-02(config-router-af)# redistribute static dell-s6000-02(config-router-af)# exit-address-family dell-s6000-02(config-router)# end dell-s6000-02# end dell-s6000-02# show run ! router bgp 1234 vrf foo neighbor 2.2.2.2 remote-as 3456 neighbor 2.2.2.2 shutdown ! address-family ipv4 unicast redistribute connected redistribute static exit-address-family ! address-family ipv6 unicast redistribute connected redistribute static exit-address-family !
What version of FRR are you using?
On Wed, Oct 18, 2017 at 4:06 PM, $iddhe$h Divekar <siddhesh.divekar@gmail.com> wrote:
Hi, Am getting following error when sending config over vty socket. VTY status 13.
Below is the config am trying to send. It happens when "redistribute connected" is sent over the socket.
configure terminal router bgp 1234 vrf foo neighbor 2.2.2.2 remote-as 3456 neighbor 2.2.2.2 shutdown address-family ipv6 unicast redistribute connected exit-address-family address-family ipv6 unicast redistribute static exit-address-family address-family ipv4 unicast redistribute connected exit-address-family address-family ipv4 unicast redistribute static exit-address-family end
If I do show running I see following config applied. router bgp 1234 vrf foo neighbor 2.2.2.2 remote-as 3456 neighbor 2.2.2.2 shutdown ! address-family ipv6 unicast redistribute connected exit-address-family !
Is there anything wrong with the config. Copy pasting the config directly works fine.
-- -$iddhesh.
_______________________________________________ dev mailing list dev@lists.frrouting.org https://lists.frrouting.org/listinfo/dev
-- -$iddhesh.