Fix the documentation in the doc/BuildingXXX and submit a PR imo. donald On Fri, Jun 16, 2017 at 1:42 PM, Dimitris Kalogeras <D.Kalogeras@noc.ntua.gr> wrote:
Hi Donald,
Thanks for exposing your environment. It help me lot debugging the freebsd environment.
Well I have figured out that: a) the make install script DOES not generate the state directory and b) consequently the daemons do not start albeit with no error message
Where should I report this ?
Cheers Dimitris
Στις 16/06/2017 03:09, Donald Sharp έγραψε:
Dimitrios -
When I build FRR, I specify 3 things:
1) Location of config files /etc/frr/XXX
2) Location of directory for Runtime files /var/run/frr/
3) Location of log directory /var/log/frr
Now I do not know what your configure line was, but please make sure that these 3 locations that you have specified actually exist and are owned by frr and the group frr.
thanks!
donald
On Thu, Jun 15, 2017 at 11:16 AM, Dimitris Kalogeras <D.Kalogeras@noc.ntua.gr> wrote:
Hi Donald,
which version of frr have you built and use (stable/2.0 or stable 3.0) ? I have tried multiple alternatives but in vain. When i fire up zebra, bgpd ospfd ripd there is no message either in the Stdout or syslog. so when I try:
root@router-test2:~ # zebra -A 127.0.0.1 root@router-test2:~ # ripd -A 127.0.0.1 root@router-test2:~ # ospfd -A 127.0.0.1 root@router-test2:~ # vtysh Exiting: failed to connect to any daemons
or
root@router-test2:~ # ospfd -d -A 127.0.0.1 root@router-test2:~ # zebra -d -A 127.0.0.1 root@router-test2:~ # vtysh Exiting: failed to connect to any daemons.
Is there any debugging switch which I can turn it on ?
Cheers, Dimitris
Στις 14/06/2017 19:53, Donald Sharp έγραψε:
Dimitris -
Have you started any of the frr daemons? In general, you need to start zebra + whatever other routing daemons you want to use.
In my case it's: /usr/lib/frr/zebra --daemon -A 127.0.0.1 /usr/lib/frr/bgpd --daemon -A 127.0.0.1 /usr/lib/frr/pimd --daemon -A 127.0.0.1
Then connect with vtysh.
donald
On Wed, Jun 14, 2017 at 12:48 PM, Dimitris Kalogeras <D.Kalogeras@noc.ntua.gr> wrote:
Hi to all of you,
I am trying to establish an initial setup of FRR on a freebsd box. I have followed the instructions on
https://github.com/FRRouting/frr/blob/master/doc/Building_FRR_on_FreeBSD11.m... . The software was built tested and installed without any problems.
However when I try to run vtysh or vtysh -b, I receive exiting: failed to connect to any daemons. How do I initialize daemons ? Is there any script ?
All of my configuration files are in /usr/local/etc/frr.
What is the proper sequence of commands ?
Cheers, Dimitris
[root@router-test2 /usr/local/etc/frr]# ls -l total 56 -rw-r--r-- 1 frr frr 655 Jun 14 20:11 babeld.conf.sample -rw-r----- 1 frr frr 0 Jun 14 20:12 bgpd.conf -rw-r--r-- 1 frr frr 622 Jun 14 20:11 bgpd.conf.sample -rw-r--r-- 1 frr frr 2801 Jun 14 20:11 bgpd.conf.sample2 -rw-r--r-- 1 frr frr 1889 Jun 14 20:11 bgpd.conf.vnc.sample -rw-r--r-- 1 frr frr 186 Jun 14 20:11 eigrpd.conf.sample -rw-r----- 1 frr frr 0 Jun 14 19:58 frr.conf -rw-r----- 1 frr frr 0 Jun 14 20:12 isisd.conf -rw-r--r-- 1 frr frr 789 Jun 14 20:11 isisd.conf.sample -rw-r--r-- 1 frr frr 650 Jun 14 20:11 ldpd.conf.sample -rw-r----- 1 frr frr 0 Jun 14 20:12 ospf6d.conf -rw-r--r-- 1 frr frr 1110 Jun 14 20:11 ospf6d.conf.sample -rw-r----- 1 frr frr 0 Jun 14 20:12 ospfd.conf -rw-r--r-- 1 frr frr 182 Jun 14 20:11 ospfd.conf.sample -rw-r----- 1 frr frr 0 Jun 14 20:12 pimd.conf -rw-r--r-- 1 frr frr 939 Jun 14 20:11 pimd.conf.sample -rw-r----- 1 frr frr 0 Jun 14 20:12 ripd.conf -rw-r--r-- 1 frr frr 406 Jun 14 20:11 ripd.conf.sample -rw-r----- 1 frr frr 0 Jun 14 20:12 ripngd.conf -rw-r--r-- 1 frr frr 390 Jun 14 20:11 ripngd.conf.sample -rw-r----- 1 frr frrvty 0 Jun 14 20:12 vtysh.conf -rw-r--r-- 1 frr frr 128 Jun 14 20:11 vtysh.conf.sample -rw-r----- 1 frr frr 0 Jun 14 20:12 zebra.conf -rw-r--r-- 1 frr frr 369 Jun 14 20:11 zebra.conf.sample
-- Χαιρετισμούς,
Δημήτρης Καλογεράς Ερευνητής Β' ΕΠΙΣΕΥ
-- Dimitrios K. Kalogeras
Electrical Engineer Ph.D. Network Engineer NTUA/ICCS _____________________________________ skype: aweboy voice: +30-210-772 1863 fax: +30-210-772 1866
_______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog
-- Χαιρετισμούς,
Δημήτρης Καλογεράς Ερευνητής Β' ΕΠΙΣΕΥ
-- Dimitrios K. Kalogeras
Electrical Engineer Ph.D. Network Engineer NTUA/ICCS _____________________________________ skype: aweboy voice: +30-210-772 1863 fax: +30-210-772 1866
-- Χαιρετισμούς,
Δημήτρης Καλογεράς Ερευνητής Β' ΕΠΙΣΕΥ
-- Dimitrios K. Kalogeras
Electrical Engineer Ph.D. Network Engineer NTUA/ICCS _____________________________________ skype: aweboy voice: +30-210-772 1863 fax: +30-210-772 1866