Are you using a single
configuration file?
Quagga used to have separated files and daemons so the sintaxes
had differences between them.
My FRR is version 8.3.1 using a
single file and vtysh:
# conf t
FRR(config)# ip route ?
A.B.C.D IP destination prefix
A.B.C.D/M IP destination prefix (e.g. 10.0.0.0/8)
FRR(config)# ip route 1.1.1.1/24 ?
A.B.C.D IP gateway address
INTERFACE IP gateway interface name
eth0 eth1 eth2 eth3 eth4 eth5 eth6 lo
Null0 Null interface
blackhole Silently discard pkts when matched
reject Emit an ICMP unreachable when matched
ip route help doesn't show that syntax as correct...any chance you have where you set that so it wasn't lost on a reboot and what it looks like?
Usage: ip route { list | flush } SELECTORip route save SELECTORip route restoreip route showdumpip route get [ ROUTE_GET_FLAGS ] ADDRESS[ from ADDRESS iif STRING ][ oif STRING ] [ tos TOS ][ mark NUMBER ] [ vrf NAME ][ uid NUMBER ] [ ipproto PROTOCOL ][ sport NUMBER ] [ dport NUMBER ]ip route { add | del | change | append | replace } ROUTE
Assuming "add" is needed, it doesn't like the Null0 at the end.
ip route add 10.223.0.0/22 Null0
Error: either "to" is duplicate, or "Null0" is a garbage.
Doug Tucker
Sr. Director of Networking and Linux Operationso: 817.975.5832
e: doug.tucker@navigaglobal.com
Newscycle Solutions is now Naviga. Learn more.
CONFIDENTIALITY NOTICE: The contents of this email message and any attachments are intended solely for the addressee(s) and may contain confidential and/or privileged information and may be legally protected from disclosure. If you are not the intended recipient of this message or their agent, or if this message has been addressed to you in error, please immediately alert the sender by reply email and then delete this message and any attachments. If you are not the intended recipient, you are hereby notified that any use, dissemination, copying, or storage of this message or its attachments is strictly prohibite
From: Leonardo <leonardo.porto@iw.net.br>
Sent: Thursday, July 25, 2024 3:01 PM
To: Doug Tucker <doug.tucker@navigaglobal.com>; Donald Sharp <donaldsharp72@gmail.com>
Cc: frog@lists.frrouting.org <frog@lists.frrouting.org>
Subject: Re: [FROG] Migration scripts for FRR from Quagga
Hi Doug, I had a similar problem migrating from Quagga to FRR, I had to declare static routes (null destination) for the networks I was announcing:
For example:
ip route X.0.10.0/23 Null0
ip route X.0.20.0/23 Null0
ip route X.0.30.0/23 Null0
Em 25/07/2024 12:58, Doug Tucker escreveu:
I am under a time crunch now and have to get things going. So with one of my routers, I copied the full bgpd.conf into frr.conf. I am receiving all routes from the remote peer, however, the only outgoing route they are getting from this config is the /24 subnet that the frr router lives in. The other 3 subnets that I have defined are not being propogated. Any ideas what would cause this and how to resolve would be appriciated. I've been searching for a frr.conf sample file on google I could use to compare to mine but coming up empty.
Doug Tucker
Sr. Director of Networking and Linux Operationso: 817.975.5832
e: doug.tucker@navigaglobal.com
Newscycle Solutions is now Naviga. Learn more.
CONFIDENTIALITY NOTICE: The contents of this email message and any attachments are intended solely for the addressee(s) and may contain confidential and/or privileged information and may be legally protected from disclosure. If you are not the intended recipient of this message or their agent, or if this message has been addressed to you in error, please immediately alert the sender by reply email and then delete this message and any attachments. If you are not the intended recipient, you are hereby notified that any use, dissemination, copying, or storage of this message or its attachments is strictly prohibite
From: frog <frog-bounces+doug.tucker=navigaglobal.com@lists.frrouting.org> on behalf of Doug Tucker via frog <frog@lists.frrouting.org>
Sent: Wednesday, June 12, 2024 12:39 PM
To: Donald Sharp <donaldsharp72@gmail.com>
Cc: frog@lists.frrouting.org <frog@lists.frrouting.org>
Subject: Re: [FROG] Migration scripts for FRR from QuaggaNaviga WARNING: External email. Please verify sender before opening attachments or clicking on links.
_______________________________________________
frog mailing list
frog@lists.frrouting.org
https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.frrouting.org%2Flistinfo%2Ffrog&data=05%7C02%7Cdoug.tucker%40navigaglobal.com%7C8f350f5a59ab458b8dff08dc8b12a04e%7C648867724322451bb3f5240270eb4e86%7C0%7C0%7C638538159342426343%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=Cp%2BCeOEZSN%2BR5wZwFVdsIDPT%2BAUKPpBL9vtdqximVps%3D&reserved=0