Chriztoffer Hansen wrote:
On Sun, 28 Feb 2021 at 08:36, Joe Maimon <jmaimon@jmaimon.com> wrote:
route-map contains the command continue
Since it also contains the commands on-match goto and on-match next, I suppose that continue is there for syntax compatibility with IOS. Personal disclaimer: Please do not assume 110 % 1:1 with Cisco IOS. ;) I do not, however, in this instance (and perhaps many others) it would clearly be a net positive to be compatible, as in its own right, the syntax is more intuitive.
The FRR docs - in my opinion - does a very decent job of explaining the syntax.
https://docs.frrouting.org/en/latest/routemap.html#route-map-exit-action-com...
Except that it does not accept the syntax, so that should be more clearly recognizable as buggy.
IOS allows the continue command to be used with or without a next clause number FRR does not. Not true according to the docs (use link above).
frr-7.7-dev debian67# conf t debian67(config)# route-map test per 10 debian67(config-route-map)# continue % Command incomplete: continue debian67(config-route-map)# continue 20 debian67(config-route-map)# ios 15.5 noc12sw28rt23#conf t Enter configuration commands, one per line. End with CNTL/Z. noc12sw28rt23(config)#route-map test per 10 noc12sw28rt23(config-route-map)#continue noc12sw28rt23(config-route-map)#no route-map test noc12sw28rt23(config)#end noc12sw28rt23#