Hello, I am trying to migrate from IOX to FRR4.0. I have a simple configuration of 2 VRFs: red and blue. No VRF route leaking is needed. I know VRF route leaking was added to FRR5.0. But since I don’t do that. Can FRR4.0 be used to - Configure 2 VRFs for routes, attach different RD/RT to routes, and advertise routes into corresponding VPNs with FRR4.0? - Any configuration examples? Below is the current Cisco configuration. ip vrf red rd 100:101 route-target export 200:101 route-target import 200:101 ! ip vrf blue rd 100:201 route-target export 200:201 route-target import 200:201 ! interface Loopback101 ip vrf forwarding red ! interface Loopback102 ip vrf forwarding blue ! router bgp 100 neighbor 10.10.10.2 remote-as 200 neighbor 10.10.10.2 update-source Loopback0 ! address-family vpnv4 neighbor 10.10.10.2 activate neighbor 10.10.10.2 send-community both exit-address-family ! address-family ipv4 vrf red redistribute connected exit-address-family ! address-family ipv4 vrf blue redistribute connected exit-address-family thanks - Heidi