Hi All, I have a peculiar problem with reaching two VPN endpoints between L3VPN enabled FRR Routers I see the routes and everything w.r.t to control plane appears to be fine, but when I try to source the traffic I cant ping each other r1# sh ip route vrf BLUE Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP, T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, F - PBR, f - OpenFabric, > - selected route, * - FIB route, q - queued route, r - rejected route VRF BLUE: B> 100.65.64.152/30 [200/0] via x.x.x.x(vrf default) (recursive), label 16, 00:33:56 * via 100.65.64.137, bond0.3054(vrf default), label 179/16, 00:33:56 C>* 100.65.64.156/30 is directly connected, bond0.3600, 00:47:03 B> 100.65.64.160/30 [200/0] via x.x.x.x(vrf default) (recursive), label 16, 00:13:06 * via 100.65.64.137, bond0.3054(vrf default), label 179/16, 00:13:06 C>* 100.65.64.164/30 is directly connected, eth10, 00:13:24 *root@r1:~# ping -I eth10 100.65.64.161ping: Warning: source address might be selected on device other than eth10.PING 100.65.64.161 (100.65.64.161) from 100.65.64.138 eth10: 56(84) bytes of data.^C* I don't understand this message at all, why it always picking a wrong address when I try to ping it. Can anyone give insights to this? -- -- Rakesh Madupu 2xJNCIE - SP/DC / CCIE-SP#47613 https://r2079.wordpress.com