Hi list, I'm trying to import routes from one VRF into my default VRF. This is my sample config: debian# show running-config Building configuration... Current configuration: ! frr version 7.4 frr defaults traditional hostname debian log syslog informational no ip forwarding no ipv6 forwarding service integrated-vtysh-config ! router bgp 11111 ! address-family ipv4 unicast network 1.1.1.0/24 exit-address-family ! router bgp 22222 vrf red ! address-family ipv4 unicast network 2.2.2.0/24 exit-address-family ! line vty ! end Now I add the import: debian# conf t debian(config)# router bgp 11111 debian(config-router)# address-family ipv4 unicast debian(config-router-af)# import vrf red debian(config-router-af)# end Everything works fine. ‘show running-configuration’ shows the correct config. Then I save the config and restart frr: debian# write mem Note: this version of vtysh never writes vtysh.conf Building Configuration... Integrated configuration saved to /etc/frr/frr.conf [OK] debian# exit root@debian:~# systemctl restart frr root@debian:~# vtysh Hello, this is FRRouting (version 7.4). Copyright 1996-2005 Kunihiro Ishiguro, et al. debian# sh ru Building configuration... Current configuration: ! frr version 7.4 frr defaults traditional hostname debian log syslog informational no ip forwarding no ipv6 forwarding service integrated-vtysh-config ! router bgp 11111 ! address-family ipv4 unicast network 1.1.1.0/24 import vrf red exit-address-family ! router bgp 11111 vrf red ! line vty ! end Why is the router bgp 22222 vrf red block now missing? As I said, this configuration worked fine until I saved it and restarted frr. Cheers, Sascha