1) Everything looks ok in the conversion. 2) I'm not aware of equivalent `max-metric router-lsa on-startup wait-for-bgp` or `timers pacing lsa-group 300` in FRR at this point in time. donald On Sat, Dec 28, 2019 at 4:04 AM Antoine DURAND <anto.d@gmx.fr> wrote:
Hello, I am going to replace a Cisco configured with bgp and ospf with a new FRR router.
Does the conversion from the Cisco configuration to FRR seem correct to you ? !!!CISCO!!! ! interface Loopback0 ip address X.X.X.1 255.255.255.255 ! interface FastEthernet2/0 ip address 192.168.10.1 255.255.255.252 ip ospf authentication message-digest ip ospf message-digest-key 1 md5 PASSWORD ip ospf network point-to-point ip ospf hello-interval 3 ip ospf dead-interval 15 duplex auto speed auto ! router ospf 1 router-id X.X.X.1 max-metric router-lsa on-startup wait-for-bgp log-adjacency-changes area 0 authentication message-digest timers pacing lsa-group 300 redistribute connected passive-interface FastEthernet0/0 network X.X.X.1 0.0.0.0 area 0 network 192.168.10.1 0.0.0.0 area 0 ! !!!FRR!!! ! interface lo ip address X.X.X.1/32 ! interface enp0s9 ip address 192.168.10.1/30 ip ospf authentication message-digest ip ospf message-digest-key 1 md5 PASSWORD ip ospf network point-to-point ip ospf hello-interval 3 ip ospf dead-interval 15 ! router ospf ospf router-id X.X.X.1 log-adjacency-changes area 0 authentication message-digest redistribute connected passive-interface enp0s3 network X.X.X.1 0.0.0.0 area 0 network 192.168.10.1 0.0.0.0 area 0 !
On the Cisco I use two commands which I cannot manage to transcribe under FRR:
max-metric router-lsa on-startup wait-for-bgp timers pacing lsa-group 300
Do you know what the equivalent in FRR ?
Thank you _______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog