Hi there, Does anyone have a full MPLS layer 3 VPN example I can test out? Also, which version I should try with. I have tried with FRR 6.0 and can see routes under the VRF like below: ord-b457489f5df65f1f# show bgp vrf vrf2 ipv4 </snip> Network Next Hop Metric LocPrf Weight Path *> 5.5.5.1/32 0.0.0.0 0 32768 ? *> 10.13.12.0/30 0.0.0.0 0 32768 ? However I can't see them in the main vpn table or sent to vpn peers. ord-b457489f5df65f1f# show bgp ipv4 vpn No BGP prefixes displayed, 0 exist Have tried with rt/rd/label config under vrf-policy in 'router bgp xxxx' and also under 'router xxxx vrf vrf2'. redistribute connected redistribute static label vpn export 34712 rd vpn export 10.12.12.1:100 nexthop vpn export 10.12.12.1 rt vpn both 45437:100 I followed the Linux VRF instructions for setting up VRF and that appears ok. Any ideas are welcome. Cheers, Mark