Heikki - I have fixed the above issue: https://github.com/FRRouting/frr/pull/3199 Please note: I did not test to see if it worked properly when attempting to connect to a neighbor with authentication turned on. Giving the state of what I just fixed, I would be surprised if it did. Additionally I noticed and fixed improper parsing of the `eigrp bandwidth X` command. All - EIGRP needs some care and attention and we would love for someone to step up with fixes for it. thanks! donald On Thu, Oct 18, 2018 at 5:10 AM Heikki Lavaste <heikki.lavaste@hotmail.com> wrote:
Hi,
If I try to enable authentication for EIGRP, --> FRR-1(config-if)# ip authentication key-chain eigrp 100 test, │ I get the following error: " Key chain with specified name not found"
Running config:
hostname FRR-1 service integrated-vtysh-config ! key chain test key 1 key-string testing ! interface eth2 ip address 192.168.2.1/24 ! interface eth4 ip address 192.168.200.2/24 ! router eigrp 100 network 100.100.100.0/24 network 192.168.2.0/24
rpm -qa | grep frr │ frr-pythontools-6.0-001.el7.centos.x86_64 │ frr-6.0-001.el7.centos.x86_64
CentOS Linux release 7.5.1804 (Core)
The command seems to be there, even though not mentioned in the Docs, ( only for RIP). Should this work?
Kind Regards Heikki Lavaste _______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog