Hi,
BGP neighbor is
2604:880:62::1, remote AS 54540, local AS 266671, external link
BGP version 4, remote router ID 23.227.177.255, local router
ID 23.227.178.114
BGP state = Established, up for 00:00:17
Last read 00:00:17, Last write 00:00:16
Hold time is 90, keepalive interval is 30 seconds
Neighbor capabilities:
4 Byte AS: advertised and received
AddPath:
IPv4 Unicast: RX advertised IPv4 Unicast
IPv6 Unicast: RX advertised IPv6 Unicast
Route refresh: advertised and received(old & new)
Address Family IPv4 Unicast: advertised
Address Family IPv6 Unicast: advertised and received
Hostname Capability: advertised (name:
speedykvm.confiared.com,domain name: n/a) not received
Graceful Restart Capabilty: advertised and received
Remote Restart timer is 120 seconds
Address families by peer:
none
Graceful restart information:
End-of-RIB send: IPv6 Unicast
End-of-RIB received: IPv6 Unicast
Message statistics:
Inq depth is 0
Outq depth is 0
Sent Rcvd
Opens: 1 1
Notifications: 0 0
Updates: 2 2
Keepalives: 1 2
Route Refresh: 0 0
Capability: 0 0
Total: 4 5
Minimum time between advertisement runs is 0 seconds
For address family: IPv4 Unicast
Not part of any update group
Community attribute sent to this neighbor(all)
0 accepted prefixes
For address family: IPv6 Unicast
Update group 1, subgroup 1
Packet Queue length 0
Community attribute sent to this neighbor(all)
1 accepted prefixes
Connections established 1; dropped 0
Last reset never
External BGP neighbor may be up to 20 hops away.
Local host: 2604:880:64:2d7::ae68, Local port: 179
Foreign host: 2604:880:62::1, Foreign port: 52979
Nexthop: 23.227.178.114
Nexthop global: 2604:880:64:2d7::ae68
Nexthop local: ::
BGP connection: non shared network
BGP Connect Retry Timer in Seconds: 120
Read thread: on Write thread: on
When I add
debug bgp neighbor-events:
/usr/lib/frr/bgpd -f
/etc/frr/bgpd.conf -C
2019/09/05 09:39:03 errors: BGP: [EC 100663304] ERROR: No such
command on config line 20: address-family ipv6
2019/09/05 09:39:03 errors: BGP: [EC 100663304] ERROR: No such
command on config line 21: network 2803:1920::/32
2019/09/05 09:39:03 errors: BGP: [EC 100663304] ERROR: No such
command on config line 22: neighbor 2604:880:62::1 activate
2019/09/05 09:39:03 errors: BGP: [EC 100663304] ERROR: No such
command on config line 23: exit-address-family
2019/09/05 09:39:03 errors: BGP: [EC 100663304] ERROR: No such
command on config line 25: address-family ipv4
2019/09/05 09:39:03 errors: BGP: [EC 100663304] ERROR: No such
command on config line 26: network 45.225.75.0/24
2019/09/05 09:39:03 errors: BGP: [EC 100663304] ERROR: No such
command on config line 27: neighbor 23.227.177.1 activate
2019/09/05 09:39:03 errors: BGP: [EC 100663304] ERROR: No such
command on config line 28: exit-address-family
I'd like to see the output of: show bgp neighbors 2604:880:62::1 And the output when you turn on `debug bgp neighbor-events` to see what is going on. Thanks! donald On Thu, Sep 5, 2019 at 8:58 AM alpha_one_x86 <alpha_one_x86@first-world.info> wrote:Hi, I have NoNeg state on IPv6 only with this bgpd.conf: ! ! !interface eth2 ! ipv6 nd suppress-ra ! !interface lo ! router bgp 266671 bgp router-id 23.227.178.114 network 45.225.75.0/24 neighbor 23.227.177.1 remote-as 54540 neighbor 23.227.177.1 soft-reconfiguration inbound neighbor 23.227.177.1 ebgp-multihop 20 neighbor 2604:880:62::1 remote-as 54540 neighbor 2604:880:62::1 disable-connected-check neighbor 2604:880:62::1 ebgp-multihop 20 no bgp network import-check ! address-family ipv6 network 2803:1920::/32 neighbor 2604:880:62::1 activate exit-address-family ! address-family ipv4 network 45.225.75.0/24 neighbor 23.227.177.1 activate exit-address-family ! !ip forwarding !ipv6 forwarding ! line vty ! Any idea? -- alpha_one_x86/BRULE Herman <alpha_one_x86@first-world.info> Main developer of Supercopier/Ultracopier/CatchChallenger, Esourcing and server management IT, OS, technologies, research & development, security and business department _______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog
-- alpha_one_x86/BRULE Herman <alpha_one_x86@first-world.info> Main developer of Supercopier/Ultracopier/CatchChallenger, Esourcing and server management IT, OS, technologies, research & development, security and business department