Hi,
I have the following problem:
I'm not able save the router config.If I exit out of vtysh and jump back in, the config is reset back to defaults.
[root@frr frr]# vtysh
Hello, this is FRRouting (version 7.3.1).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
frr# conf t
frr(config)# hostname Heikki
Heikki(config)# do write
Note: this version of vtysh never writes vtysh.conf
Building Configuration...
Integrated configuration saved to /etc/frr/frr.conf
[OK]
Heikki(config)# do sh running-config
Building configuration...
Current configuration:
!
frr version 7.3.1
frr defaults traditional
hostname frr
hostname Heikki
service integrated-vtysh-config
!
line vty
!
end
Heikki(config)# do sh startup-config
Heikki(config)# exit
Heikki# exit
[root@frr frr]# vtysh
Hello, this is FRRouting (version 7.3.1).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
frr#
According to systemctl, the config save runs with code 0.
Aug 11 12:23:38 frr watchfrr[1514]: configuration write completed with exit cod0
I'm pretty sure I'm missing something very simple here, but just can't figure out what it is.
Any suggestions for troubleshooting steps?
Br
Heikki
_______________________________________________