https://github.com/FRRouting/frr/issues/361
Am 17.09.2019 um 09:00 schrieb Jan Marquardt <jm@artfiles.de>:
Hi Stefan,
as far as I remember I had a similar issue some time ago which I solved by adding the addresses to lo instead of dummyN.
Best Regards
Jan
Am 17.09.2019 um 08:48 schrieb Stefan Priebe - Profihost AG <s.priebe@profihost.ag>:
Hello list,
i'm trying to get an linux kernel routing table entry like this one: # ip r get 52.218.237.186 52.218.237.186 via 192.0.2.2 dev br99 src 37.228.152.3
but frr always creates entries like this one: # ip r get 52.218.237.186 52.218.237.186 via 192.0.2.2 dev br99 src 192.0.2.3
37.228.152.3 is an ip of an dummy0 interface and 192.0.2.3 is the ip of br99.
frr.conf:
router bgp XXXXX bgp router-id 37.228.152.3 neighbor internal-bgp peer-group neighbor internal-bgp remote-as XXXXX neighbor internal-bgp capability dynamic neighbor 37.228.152.2 peer-group internal-bgp neighbor 37.228.152.2 description R2 neighbor 37.228.152.2 update-source dummy0 ! address-family ipv4 unicast neighbor 37.228.152.2 next-hop-self exit-address-family !
Greets, Stefan
_______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog