Hi everyone, Is anyone using the "bgp view" feature in FRR at all? I've been using this feature on FRR 7.5.1 on Ubuntu 20.04 for several months without issue. The upgrade to FRR 8.0 that was pushed out the four weeks back broke all the BGP feeds that I have (basically for a routing analysis looking glass activity). This is the an example of the configuration I'm using: router bgp 65534 view I2 bgp router-id 128.223.157.40 bgp log-neighbor-changes no bgp default ipv4-unicast timers bgp 15 45 neighbor 64.57.28.241 remote-as 11537 neighbor 64.57.28.241 description I2 neighbor 64.57.28.241 ebgp-multihop 255 ! address-family ipv4 unicast neighbor 64.57.28.241 activate neighbor 64.57.28.241 prefix-list DENY-ALL out neighbor 64.57.28.241 route-map IMPORT in exit-address-family ! and I have around 30 BGP feeds, all going into different views. If I use FRR 7.5.1, the BGP sessions are up and running just fine. But in 8.0, they all sit there in "Connect" (IPv4 and IPv6). It looks like this, in a testbed of mine (I can't put the production system to FRR 8.0 unfortunately). Configuration: router bgp 131076 view C1100 bgp router-id 192.168.1.230 bgp log-neighbor-changes no bgp default ipv4-unicast neighbor 192.168.1.254 remote-as 131076 neighbor 192.168.1.254 description Cisco C1100 Border ! address-family ipv4 unicast distance bgp 200 200 200 neighbor 192.168.1.254 activate exit-address-family ! frr# sh bgp view C1100 sum IPv4 Unicast Summary: BGP router identifier 192.168.1.230, local AS number 131076 vrf-id 1 BGP table version 0 RIB entries 0, using 0 bytes of memory Peers 1, using 727 KiB of memory Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc 192.168.1.254 4 131076 0 0 0 0 0 never Connect 0 Cisco Total number of neighbors 1 If I revert to FRR 7.5.1 on the testbed, the peering comes up. bgpd.log says this: 2021/08/27 14:42:12 ZEBRA: [VTVCM-Y2NW3] Configuration Read in Took: 00:00:00 2021/08/27 14:42:12 BGP: [VTVCM-Y2NW3] Configuration Read in Took: 00:00:00 2021/08/27 14:42:12 STATIC: [VTVCM-Y2NW3] Configuration Read in Took: 00:00:00 and frr.log has basically the same content. The docs for bgpd don't seem to have changed and I can't find anything via the CLI that suggests the configuration is different in 8.0. Any hints or tips or clues on how to fix this? Or is this a bug introduced in 8.0? Thanks! philip --