Hi, Is the bgp unnumbered feature broken from version 5.0? I checked in version 6 , I see the bgp neighborship established with unnumbered and if I advertise the routes its showing ipv4 address as next hop instead of interface ID/IPv6 Link local. Below are the show outputs and the running configurations of one of the system. Can somebody please help me out? Am i missing something? ``` show ip bgp summary IPv4 Unicast Summary: BGP router identifier 3.3.3.3, local AS number 65535 vrf-id 0 BGP table version 0 RIB entries 1, using 160 bytes of memory Peers 2, using 41 KiB of memory Peer groups 2, using 128 bytes of memory Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/P fxRcd br200 4 65001 79 87 0 0 0 00:09:08 0 br10 4 65002 119 106 0 0 0 00:08:09 1 ``` ``` show ip bgp BGP table version is 0, local router ID is 3.3.3.3, vrf id 0 Status codes: s suppressed, d damped, h history, * valid, > best, = multipath, i internal, r RIB-failure, S Stale, R Removed Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self Origin codes: i - IGP, e - EGP, ? - incomplete Network Next Hop Metric LocPrf Weight Path 40.1.1.0/24 4.4.4.4 0 0 65002 i ``` ``` interface lo100 ip address 3.3.3.3/32 ! router bgp 65535 bgp router-id 3.3.3.3 bgp bestpath as-path multipath-relax bgp bestpath compare-routerid neighbor fabric peer-group neighbor fabric remote-as 65001 neighbor fabric capability extended-nexthop neighbor fabric1 peer-group neighbor fabric1 remote-as 65002 neighbor fabric1 capability extended-nexthop neighbor br200 interface peer-group fabric neighbor br10 interface peer-group fabric1 ! address-family ipv6 unicast neighbor fabric activate neighbor fabric1 activate exit-address-family ``` Thanks, Madhu