Hi all, I have a centos7 system with netns pre-created and populated with an interface: $ sudo ip netns exec ns-data ip -4 -br a lo UNKNOWN 127.0.0.1/8 eth1 UP 192.168.1.101/24 Whereas my base routing instance has a management interface: $ ip -4 -br a lo UNKNOWN 127.0.0.1/8 eth0 UP 10.0.0.101/24 I want to run vtysh and be able to navigate/configure these VRFs, but I cant see the ns-data VRF even if I launch vtysh in that namespace. [centos@pc1 ~]$ sudo vtysh pc1.nuage.lab# show interface Interface eth0 is up, line protocol is up Link ups: 0 last: (never) Link downs: 0 last: (never) vrf: Default-IP-Routing-Table index 2 metric 0 mtu 1500 speed 4294967295 flags: <UP,BROADCAST,RUNNING,MULTICAST> Type: Ethernet HWaddr: fa:16:3e:28:67:f8 inet 10.0.0.101/24 broadcast 10.0.0.255 inet6 fe80::f816:3eff:fe28:67f8/64 Interface Type Other Interface lo is up, line protocol is up Link ups: 0 last: (never) Link downs: 0 last: (never) vrf: Default-IP-Routing-Table index 1 metric 0 mtu 65536 speed 0 flags: <UP,LOOPBACK,RUNNING> Type: Loopback Interface Type Other pc1.nuage.lab# show vrf vrf ns-data inactive If I try to create a VRF with a namespace name mathing my existing netns, I got this error: pc1.nuage.lab(config)# vrf ns-data pc1.nuage.lab(config-vrf)# netns ns-data % [ZEBRA] Unknown command: netns ns-data What am I doing wrong here? -- BR, Roman Dodin