Chris - FRR currently sets RT_SCOPE_UNIVERSE to the routes it installs. It would not be too hard to add the ability to change this, someone would just need to write it up. donald On Fri, Mar 29, 2019 at 4:22 PM Chris Malton (Delta V) <chris@deltav-tech.co.uk> wrote:
Hi all,
I'm sure this must have been asked before, but is it possible to set "scope link" on an IP address in FRR? I use private link addresses heavily because of the exhaustion of v4, and therefore everything is using RFC1918 internally.
While I'm deploying v6 and we don't have issues there, I don't want RFC1918 addresses to show up (or, indeed, fail to show up) for v4 traceroutes. All of my routers have loopback addresses, and I'd like Linux to use them in preference to the RFC1918s on the interface. The normal way of me doing this is to set "scope link" on all of them.
Alas, such an option doesn't seem to exist in FRR.
Am I missing something?
Regards,
Chris Malton
-- Delta V Technologies Limited 03333 402 406 www.deltav-tech.co.uk Office: 17 Elm Close, Southampton, SO16 7DT Company No. 11006104 Registered in England and Wales
_______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog