EIGRP not working in 7.3/7.4 releases
Hi, First, thank you for integrating FRR in OpenWrt. I used the latest FRR package in OpenWrt (which is FRR 7.4 release). I'm trying to configure EIGRP but it seems the "network" command is not configuring the correct network. For example, see below steps. I'm configuring "network 172.16.1.0/24" under eigrp but the running config shows "network 255.255.255.0/24" I'm not sure if this is OpenWrt specific issue or a general issue and I'll try release 7.3/7.4 on Ubuntu tomorrow. But please let me know if you latest FRR release and can successfully configure EIGRP. Thanks Amol root@arm-linux:/# vtysh Hello, this is FRRouting (version 7.4). Copyright 1996-2005 Kunihiro Ishiguro, et al. arm-linux# do show running-config Building configuration... Current configuration: ! frr version 7.4 frr defaults traditional hostname arm-linux log syslog ! password zebra ! access-list vty seq 5 permit 127.0.0.0/8 access-list vty seq 10 deny any ! line vty access-class vty ! end arm-linux# configure terminal arm-linux(config)# router eigrp 1 arm-linux(config-router)# network 172.16.1.0/24 arm-linux(config-router)# do show running-config Building configuration... Current configuration: ! frr version 7.4 frr defaults traditional hostname arm-linux log syslog ! password zebra ! router eigrp 1 network 255.255.255.0/24 ! access-list vty seq 5 permit 127.0.0.0/8 access-list vty seq 10 deny any ! line vty access-class vty ! end
I'm not seeing the same behavior: for 7.4: sharpd@eva:~$ vtysh Hello, this is FRRouting (version 7.4). Copyright 1996-2005 Kunihiro Ishiguro, et al. eva# conf eva(config)# router eigrp 1 eva(config-router)# network 172.16.1.0/24 eva(config-router)# end eva# show run Building configuration... Current configuration: ! frr version 7.4 frr defaults traditional hostname eva ! interface dummy1 ipv6 address fd00:0:0:1::2/64 ! router eigrp 1 network 172.16.1.0/24 ! For 7.3: sharpd@eva:~/frr4$ vtysh Hello, this is FRRouting (version 7.3.1). Copyright 1996-2005 Kunihiro Ishiguro, et al. eva# conf eva(config)# router eigrp 1 eva(config-router)# network 172.16.1.0/24 eva(config-router)# end eva# show run Building configuration... Current configuration: ! frr version 7.3.1 frr defaults traditional hostname eva ! interface dummy1 ipv6 address fd00:0:0:1::2/64 ! router eigrp 1 network 172.16.1.0/24 ! Can we get a `vtysh -c "show ver"` on your system? donald On Mon, Aug 10, 2020 at 6:43 AM Amol Lad <Amol.Lad@4rf.com> wrote:
Hi,
First, thank you for integrating FRR in OpenWrt. I used the latest FRR package in OpenWrt (which is FRR 7.4 release). I'm trying to configure EIGRP but it seems the "network" command is not configuring the correct network. For example, see below steps. I'm configuring "network 172.16.1.0/24" under eigrp but the running config shows "network 255.255.255.0/24"
I'm not sure if this is OpenWrt specific issue or a general issue and I'll try release 7.3/7.4 on Ubuntu tomorrow. But please let me know if you latest FRR release and can successfully configure EIGRP.
Thanks Amol
root@arm-linux:/# vtysh
Hello, this is FRRouting (version 7.4). Copyright 1996-2005 Kunihiro Ishiguro, et al.
arm-linux# do show running-config Building configuration...
Current configuration: ! frr version 7.4 frr defaults traditional hostname arm-linux log syslog ! password zebra ! access-list vty seq 5 permit 127.0.0.0/8 access-list vty seq 10 deny any ! line vty access-class vty ! end
arm-linux# configure terminal arm-linux(config)# router eigrp 1 arm-linux(config-router)# network 172.16.1.0/24
arm-linux(config-router)# do show running-config Building configuration...
Current configuration: ! frr version 7.4 frr defaults traditional hostname arm-linux log syslog ! password zebra ! router eigrp 1 network 255.255.255.0/24 ! access-list vty seq 5 permit 127.0.0.0/8 access-list vty seq 10 deny any ! line vty access-class vty ! end _______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog
root@arm-linux:/# vtysh -c "show ver" FRRouting 7.4 (arm-linux). Copyright 1996-2005 Kunihiro Ishiguro, et al. configured with: '--target=arm-openwrt-linux' '--host=arm-openwrt-linux' '--build=x86_64-pc-linux-gnu' '--program-prefix=' '--program-suffix=' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--libexecdir=/usr/lib' '--sysconfdir=/etc' '--datadir=/usr/share' '--localstatedir=/var' '--mandir=/usr/man' '--infodir=/usr/info' '--disable-nls' '--with-clippy=/home/alad/fourrf/openwrt/staging_dir/hostpkg/bin/clippy' '--prefix=/usr' '--enable-shared' '--disable-static' '--enable-user=network' '--enable-group=network' '--disable-ospfclient' '--disable-doc' '--disable-backtrace' '--localstatedir=/var/run/frr' '--sysconfdir=/etc/frr/' '--disable-babeld' '--disable-bfdd' '--enable-bgpd' '--enable-eigrpd' '--disable-fabricd' '--disable-isisd' '--disable-ldpd' '--enable-nhrpd' '--enable-ospfd' '--enable-ospf6d' '--disable-pbrd' '--disable-pimd' '--disable-ripd' '--disable-ripngd' '--enable-staticd' '--disable-vrrpd' '--enable-vtysh' '--enable-zebra' 'build_alias=x86_64-pc-linux-gnu' 'host_alias=arm-openwrt-linux' 'target_alias=arm-openwrt-linux' 'PKG_CONFIG=/home/alad/fourrf/openwrt/staging_dir/host/bin/pkg-config' 'PKG_CONFIG_PATH=/home/alad/fourrf/openwrt/staging_dir/target-arm_cortex-a9+vfpv3_musl_eabi/usr/lib/pkgconfig:/home/alad/fourrf/openwrt/staging_dir/target-arm_cortex-a9+vfpv3_musl_eabi/usr/share/pkgconfig' 'PKG_CONFIG_LIBDIR=/home/alad/fourrf/openwrt/staging_dir/target-arm_cortex-a9+vfpv3_musl_eabi/usr/lib/pkgconfig:/home/alad/fourrf/openwrt/staging_dir/target-arm_cortex-a9+vfpv3_musl_eabi/usr/share/pkgconfig' 'CC=arm-openwrt-linux-muslgnueabi-gcc' 'CXX=arm-openwrt-linux-muslgnueabi-g++' -----Original Message----- From: Donald Sharp <sharpd@cumulusnetworks.com> Sent: Monday, 10 August 2020 5:32 PM To: Amol Lad <Amol.Lad@4rf.com> Cc: frog@lists.frrouting.org Subject: Re: [FROG] EIGRP not working in 7.3/7.4 releases I'm not seeing the same behavior: for 7.4: sharpd@eva:~$ vtysh Hello, this is FRRouting (version 7.4). Copyright 1996-2005 Kunihiro Ishiguro, et al. eva# conf eva(config)# router eigrp 1 eva(config-router)# network 172.16.1.0/24 eva(config-router)# end eva# show run Building configuration... Current configuration: ! frr version 7.4 frr defaults traditional hostname eva ! interface dummy1 ipv6 address fd00:0:0:1::2/64 ! router eigrp 1 network 172.16.1.0/24 ! For 7.3: sharpd@eva:~/frr4$ vtysh Hello, this is FRRouting (version 7.3.1). Copyright 1996-2005 Kunihiro Ishiguro, et al. eva# conf eva(config)# router eigrp 1 eva(config-router)# network 172.16.1.0/24 eva(config-router)# end eva# show run Building configuration... Current configuration: ! frr version 7.3.1 frr defaults traditional hostname eva ! interface dummy1 ipv6 address fd00:0:0:1::2/64 ! router eigrp 1 network 172.16.1.0/24 ! Can we get a `vtysh -c "show ver"` on your system? donald On Mon, Aug 10, 2020 at 6:43 AM Amol Lad <Amol.Lad@4rf.com> wrote:
Hi,
First, thank you for integrating FRR in OpenWrt. I used the latest FRR package in OpenWrt (which is FRR 7.4 release). I'm trying to configure EIGRP but it seems the "network" command is not configuring the correct network. For example, see below steps. I'm configuring "network 172.16.1.0/24" under eigrp but the running config shows "network 255.255.255.0/24"
I'm not sure if this is OpenWrt specific issue or a general issue and I'll try release 7.3/7.4 on Ubuntu tomorrow. But please let me know if you latest FRR release and can successfully configure EIGRP.
Thanks Amol
root@arm-linux:/# vtysh
Hello, this is FRRouting (version 7.4). Copyright 1996-2005 Kunihiro Ishiguro, et al.
arm-linux# do show running-config Building configuration...
Current configuration: ! frr version 7.4 frr defaults traditional hostname arm-linux log syslog ! password zebra ! access-list vty seq 5 permit 127.0.0.0/8 access-list vty seq 10 deny any ! line vty access-class vty ! end
arm-linux# configure terminal arm-linux(config)# router eigrp 1 arm-linux(config-router)# network 172.16.1.0/24
arm-linux(config-router)# do show running-config Building configuration...
Current configuration: ! frr version 7.4 frr defaults traditional hostname arm-linux log syslog ! password zebra ! router eigrp 1 network 255.255.255.0/24 ! access-list vty seq 5 permit 127.0.0.0/8 access-list vty seq 10 deny any ! line vty access-class vty ! end _______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog
participants (2)
-
Amol Lad -
Donald Sharp