Problems setting default-information originate
Hi, I'm evaluating FRR; I got the most recent RPM from [0], and installed it on an up-to-date CentOS 7 machine (that was running Quagga 1.2.x before where that command worked). I want to redistribute some stuff into OSPF: funnyhostname(config-router)# default-information originate metric 90 metric-type 1 % Unknown command. Even the documentation says the command is valid and existing [1]. Any hints? Regards Timo [0] – https://github.com/FRRouting/frr/releases [1] – https://frrouting.org/user-guide/Redistribute-routes-to-OSPF.html#Redistribu...
On 02/19/2018 12:42 PM, Timo wrote:
Hi,
I'm evaluating FRR; I got the most recent RPM from [0], and installed it on an up-to-date CentOS 7 machine (that was running Quagga 1.2.x before where that command worked).
I want to redistribute some stuff into OSPF:
funnyhostname(config-router)# default-information originate metric 90 metric-type 1 % Unknown command.
It could be worked around via a route map, which is rather ugly though: default-information originate route-map ROUTE-MAP-OSPF-DEFAULT ! route-map ROUTE-MAP-OSPF-DEFAULT permit 10 match ip address ACL-OSPF-DEFAULT set metric 90 set metric-type type-1 Timo
Even the documentation says the command is valid and existing [1].
Any hints?
Regards
Timo
[0] – https://github.com/FRRouting/frr/releases
[1] – https://frrouting.org/user-guide/Redistribute-routes-to-OSPF.html#Redistribu...
participants (1)
-
Timo