it's late and i am correspondingly stupid bgp community-list standard comm-cust4 permit 3970:384 bgp community-list standard comm-cust6 permit 3970:386 bgp community-list standard comm-trans4 permit 3970:394 bgp community-list standard comm-trans6 permit 3970:396 bgp community-list standard comm-bbte permit 3970:174 ! ... ! route-map transit-in4 permit 10 set community comm-trans4 ! route-map transit-in6 permit 10 set community comm-trans6 ! route-map cust-in4 permit 10 set community comm-cust4 ! route-map cust-in6 permit 10 set community comm-cust6 results in % Malformed communities attribute 'comm-trans4' line 56: Failure to communicate[13] to bgpd, line: set community comm-trans4 % Malformed communities attribute 'comm-trans6' line 59: Failure to communicate[13] to bgpd, line: set community comm-trans6 % Malformed communities attribute 'comm-cust4' line 62: Failure to communicate[13] to bgpd, line: set community comm-cust4 % Malformed communities attribute 'comm-cust6' line 65: Failure to communicate[13] to bgpd, line: set community comm-cust6 those diagnstics are on the route-map set stanzas clue bat please randy
Hi Randy I'm using an older FRR but looking at our configs, match community needs the community list entry, but set community needs the numbers. eg: set community 8676:102 8676:2001 8676:4001 additive vs match community ids-leak-to-psys Paul. On 31/07/2024 06:01, Randy Bush wrote:
it's late and i am correspondingly stupid
bgp community-list standard comm-cust4 permit 3970:384 bgp community-list standard comm-cust6 permit 3970:386 bgp community-list standard comm-trans4 permit 3970:394 bgp community-list standard comm-trans6 permit 3970:396 bgp community-list standard comm-bbte permit 3970:174 ! ... ! route-map transit-in4 permit 10 set community comm-trans4 ! route-map transit-in6 permit 10 set community comm-trans6 ! route-map cust-in4 permit 10 set community comm-cust4 ! route-map cust-in6 permit 10 set community comm-cust6
results in
% Malformed communities attribute 'comm-trans4' line 56: Failure to communicate[13] to bgpd, line: set community comm-trans4
% Malformed communities attribute 'comm-trans6' line 59: Failure to communicate[13] to bgpd, line: set community comm-trans6
% Malformed communities attribute 'comm-cust4' line 62: Failure to communicate[13] to bgpd, line: set community comm-cust4
% Malformed communities attribute 'comm-cust6' line 65: Failure to communicate[13] to bgpd, line: set community comm-cust6
those diagnstics are on the route-map set stanzas
clue bat please
randy
_______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog
On 7/31/24 10:45, Paul Thornton wrote:
Hi Randy
I'm using an older FRR but looking at our configs, match community needs the community list entry, but set community needs the numbers.
eg:
set community 8676:102 8676:2001 8676:4001 additive
vs
match community ids-leak-to-psys
Paul.
I believe this is follows Cisco's IOS XE philosophy. Can be a tad confusing when you are running IOS XR and Junos, which do what Randy was expecting... Mark.
No true router? 🏴 Quentin
On Jul 31, 2024, at 3:42 PM, Randy Bush <randy@psg.com> wrote:
I believe this is follows Cisco's IOS XE philosophy.
Can be a tad confusing when you are running IOS XR and Junos, which do what Randy was expecting...
i am trying to replace and interoperate with real routers.
randy
_______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog
participants (4)
-
Mark Tinka -
Paul Thornton -
Quentin Young -
Randy Bush