On 14/09/2020 12:41, Amol Lad wrote:

I'm using FRR 7.4 and observed that "show bgp" does not show any prefixes but "show bgp ipv4" does show the prefixes. Is this expected behaviour?

https://github.com/FRRouting/frr/issues/965 "show bgp" is a depreciated command.

Thanks Amol

FRR(config-router)# do show bgp No BGP prefixes displayed, 0 exist

FRR(config-router)# do show bgp ipv4 BGP table version is 2, local router ID is 172.16.1.106, vrf id 0 Default local pref 100, local AS 1 Status codes: s suppressed, d damped, h history, * valid, > best, = multipath, i internal, r RIB-failure, S Stale, R Removed Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self Origin codes: i - IGP, e - EGP, ? - incomplete

Network Next Hop Metric LocPrf Weight Path *> 1.1.1.0/24 0.0.0.0 0 32768 i *> 2.2.2.0/24 172.16.1.107 0 0 2 i

-- Best regards, Chriztoffer