It works fine if I don't have vrf in the config. Looks like vrf is not known to bgp and hence it return config error back. On Wed, Oct 18, 2017 at 2:28 PM, $iddhe$h Divekar < siddhesh.divekar@gmail.com> wrote:

Hi, Am getting following error when sending config over vty socket. VTY status 13.

Below is the config am trying to send. It happens when "redistribute connected" is sent over the socket.

configure terminal router bgp 1234 vrf foo neighbor 2.2.2.2 remote-as 3456 neighbor 2.2.2.2 shutdown address-family ipv6 unicast redistribute connected exit-address-family address-family ipv6 unicast redistribute static exit-address-family address-family ipv4 unicast redistribute connected exit-address-family address-family ipv4 unicast redistribute static exit-address-family end

If I do show running I see following config applied. router bgp 1234 vrf foo neighbor 2.2.2.2 remote-as 3456 neighbor 2.2.2.2 shutdown ! address-family ipv6 unicast redistribute connected exit-address-family !

Is there anything wrong with the config. Copy pasting the config directly works fine.

-- -$iddhesh.

-- -$iddhesh.