[dev] Vty password is not set error

[Donald Sharp]

Siddhesh -

Did you add the enable password and restart zebra?

donald

On Wed, Aug 9, 2017 at 5:05 PM, $iddhe$h Divekar
<siddhesh.divekar at gmail.com> wrote:
> Hi All,
>
> I was successful in installing quaga and got it working fine.
> Then I decided to try frr.
>
> I followed all the instructions mentioned in the link below.
> https://github.com/FRRouting/frr/blob/master/doc/Building_FRR_on_Ubuntu1604.md
>
> Now when I try to telnet to zebra, it says "Vty password is not set".
>
> telnet localhost zebra
> Trying 127.0.0.1...
> Connected to localhost.
> Escape character is '^]'.
> Vty password is not set.
> Connection closed by foreign host.
>
> I have added following config to /etc/frr/zebra.conf
> but that is not helping.
>
> sudo cat /etc/frr/zebra.conf
> [sudo] password for sidhesh:
> ! Zebra configuration saved from vty
> !  2002/02/28 01:46:12
> !
> hostname LinuxRouter
> password zebra
> enable password z3bRa
> log file /var/log/zebra/zebra.log
> !
> interface eth0
>  description Interface to External Network
>  ip address 10.0.0.1/24
> !
> interface eth1
>  description Interface to Internal Network
>  ip address 192.168.66.1/24
> password zebra
>
> How do I configure Vty password for zebra in frr.
>
> --
> -$iddhesh.
>
> _______________________________________________
> dev mailing list
> dev at lists.frrouting.org
> https://lists.frrouting.org/listinfo/dev
>