[dev] Vty password is not set error

[$iddhe$h Divekar]

Hi Donald,

Is there any other file in which i need to setup the vty password other
than /etc/frr/zebra.conf ?

On Thu, Aug 10, 2017 at 8:14 AM, $iddhe$h Divekar <
siddhesh.divekar at gmail.com> wrote:

> Hi Donald,
>
> I added the password which can be seen in zebra.conf below and restart frr
> using following commands.
>
> systemctl stop frr
> systemctl start frr
>
> sudo cat /etc/frr/zebra.conf
> [sudo] password for sidhesh:
> ! Zebra configuration saved from vty
> !  2002/02/28 01:46:12
> !
> hostname LinuxRouter
> password zebra
> enable password z3bRa
> log file /var/log/zebra/zebra.log
> !
> interface eth0
>  description Interface to External Network
>  ip address 10.0.0.1/24
> !
> interface eth1
>  description Interface to Internal Network
>  ip address 192.168.66.1/24
> *password zebra*
>
> On Thu, Aug 10, 2017 at 4:52 AM, Donald Sharp <sharpd at cumulusnetworks.com>
> wrote:
>
>> Siddhesh -
>>
>> Did you add the enable password and restart zebra?
>>
>> donald
>>
>> On Wed, Aug 9, 2017 at 5:05 PM, $iddhe$h Divekar
>> <siddhesh.divekar at gmail.com> wrote:
>> > Hi All,
>> >
>> > I was successful in installing quaga and got it working fine.
>> > Then I decided to try frr.
>> >
>> > I followed all the instructions mentioned in the link below.
>> > https://github.com/FRRouting/frr/blob/master/doc/Building_FR
>> R_on_Ubuntu1604.md
>> >
>> > Now when I try to telnet to zebra, it says "Vty password is not set".
>> >
>> > telnet localhost zebra
>> > Trying 127.0.0.1...
>> > Connected to localhost.
>> > Escape character is '^]'.
>> > Vty password is not set.
>> > Connection closed by foreign host.
>> >
>> > I have added following config to /etc/frr/zebra.conf
>> > but that is not helping.
>> >
>> > sudo cat /etc/frr/zebra.conf
>> > [sudo] password for sidhesh:
>> > ! Zebra configuration saved from vty
>> > !  2002/02/28 01:46:12
>> > !
>> > hostname LinuxRouter
>> > password zebra
>> > enable password z3bRa
>> > log file /var/log/zebra/zebra.log
>> > !
>> > interface eth0
>> >  description Interface to External Network
>> >  ip address 10.0.0.1/24
>> > !
>> > interface eth1
>> >  description Interface to Internal Network
>> >  ip address 192.168.66.1/24
>> > password zebra
>> >
>> > How do I configure Vty password for zebra in frr.
>> >
>> > --
>> > -$iddhesh.
>> >
>> > _______________________________________________
>> > dev mailing list
>> > dev at lists.frrouting.org
>> > https://lists.frrouting.org/listinfo/dev
>> >
>>
>
>
>
> --
> -$iddhesh.
>



-- 
-$iddhesh.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.frrouting.org/pipermail/dev/attachments/20170811/9930a5e8/attachment.html>