[dev] BMP Issue in FRR 10.0
Boris Hassanov
bhassanov at yahoo.com
Tue Aug 6 17:53:44 UTC 2024
Hi Donatas,
Thank you.
So what is the roadmap for a support of Stats type 7 and 8?
SY,
Boris
On Tuesday, July 23, 2024 at 03:13:31 PM GMT+3, Donatas Abraitis <donatas.abraitis at gmail.com> wrote:
You are checking the master branch (development) documentation. You should use https://docs.frrouting.org/en/stable-10.0/bmp.html.
On Tue, Jul 23, 2024 at 3:08 PM Boris Hassanov via dev <dev at lists.frrouting.org> wrote:
>
>
>
> ---------- Forwarded message ----------
> From: Boris Hassanov <bhassanov at yahoo.com>
> To: "dev at lists.frrouting.org" <dev at lists.frrouting.org>
> Cc:
> Bcc:
> Date: Mon, 17 Jun 2024 17:12:18 +0000 (UTC)
> Subject: BMP Issue in FRR 10.0
> Hi all,
>
> During the testing I found strange BMP issue. RFC 7854 describes several types of BMP messages, one of them is Stats Report (https://www.rfc-editor.org/rfc/rfc7854#page-13).
>
> The FRR documentation (.https://docs.frrouting.org/en/latest/bmp.html#bmp-session-configuration ) explicitly says:
> "
> * the following statistics codes are implemented:
> * 0: count of prefixes rejected
> * 2: count of duplicate prefix withdrawals
> * 3: count of prefixes with loop in cluster id
> * 4: count of prefixes with loop in AS-path
> * 5: count of prefixes with loop in originator
> * 7: count of routes in adj-rib-in
> * 8: count of routes in Loc-RIB
> * 11: count of updates subjected to RFC 7607 “treat as withdrawal” handling due to errors
> * 65531: experimental count of prefixes rejected due to invalid next-hop
> Note that stat items 3, 4 and 5 are specified to count updates, but FRR implements them as prefix-based counters.
> "
> The issue is that I do not see Stats Types 7 and 8 in the BMP message from FRR towards BMP collector (goBMP in my test setup):
>
>
>
>
> There are only 7 statistic types and no statistic codes 7 and 8.
>
> Is this a bug or I missed something in BMP config ?
>
> Here is the BMP config oof the FRR for the reference:
>
> bmp targets ubuntu-BMP
> bmp stats interval 300
> bmp monitor ipv4 unicast pre-policy
> bmp monitor ipv4 unicast loc-rib
> bmp connect 10.30.131.101 port 5050 min-retry 30000 max-retry 3000 source-interface eth2
> exit
>
> FRR1# sh ver
> FRRouting 10.0_git (FRR1) on Linux(5.15.0-102-generic).
>
> Thank you in advance for the clarification.
>
>
> SY,
> Boris
>
>
>
>
>
>
>
>
> ---------- Forwarded message ----------
> From: Boris Hassanov via dev <dev at lists.frrouting.org>
> To: "dev at lists.frrouting.org" <dev at lists.frrouting.org>
> Cc:
> Bcc:
> Date: Mon, 17 Jun 2024 17:12:18 +0000 (UTC)
> Subject: [dev] BMP Issue in FRR 10.0
> _______________________________________________
> dev mailing list
> dev at lists.frrouting.org
> https://lists.frrouting.org/listinfo/dev
>
--
Donatas
More information about the dev
mailing list