[FROG] Getting Started...
Richard J Palmer
richard at merula.net
Tue Jun 13 18:16:32 EDT 2017
OK
I have done that ....
BUT after restarting I am now seeing ....
ZEBRA: netlink-cmd (NS 0) error: Invalid argument,
type=RTM_NEWROUTE(24), seq=1554090, pid=0
repeated lots of times - I am trying a reboot (as that has cleared
this before ....). And after a reboot those errors have gone ...
NOW I know this is normally down to the kernel routing table size...
BUT I have as yet not found guidance on how to set this correctly for
routers.
I'm actually willing to pay for some help getting these running
correctly as a one off if anyone would be interested in helping /
advising ...
I think the setup is close here ... Just trying to determine what I am
missing ...
Thanks in advance
Richard
Richard Palmer | Director | Merula Limited
Company Registered in England and Wales No. 3243995
5 Avro Court, Huntingdon, Cambridgeshire, PE29 6XS
Phone 01480 222940 | Support 0845 330 0666
Support Email support at merula.net
> --- Original message ---
> Subject: Re: [FROG] Getting Started...
> From: Donald Sharp <sharpd at cumulusnetworks.com>
> To: Richard J Palmer <richard at merula.net>
> Cc: <frog at lists.frrouting.org>
> Date: Tuesday, 13/06/2017 2:21 AM
>
> Run ./configure with a --enable-multipath=X Where X is not 1.
>
> donald
>
> On Mon, Jun 12, 2017 at 9:14 PM, Richard J Palmer <richard at merula.net>
> wrote:
>>
>> Hi there
>>
>> I am testing FRR as an alternative to Quagga on what is a very busy
>> core
>> router - with multiple full table BGP Sessions.
>>
>> I am currently using this on Slackware 14.2 ... I have things up and
>> running
>> and some of the quagga bugs seem to have been cleared which is a PLUs
>> BUT I
>> am seeing oddness - most obviosuly with IPv6.
>>
>> Running a traceroute from a server behind it is alternating between
>>
>> traceroute6 l.root-servers.net
>> traceroute to l.ROOT-SERVERS.NET (2001:500:9f::42) from
>> 2a00:1940:0:1::78,
>> 30 hops max, 24 byte packets
>> 1 lon1-gw1.merula.net (2a00:1940:0:1::70) 0.647 ms 0.389 ms
>> 0.425 ms
>> 2 2a00:1940:0:1::67 (2a00:1940:0:1::67) 0.454 ms 0.565 ms 2.283
>> ms
>> 3 2001:7f8:17::8480:1 (2001:7f8:17::8480:1) 0.753 ms 0.662 ms
>> 0.728 ms
>> 4 2a00:1a80:0:1::5:2 (2a00:1a80:0:1::5:2) 7.458 ms 5.662 ms
>> 5.59 ms
>> 5 l.root-servers.net (2001:500:9f::42) 5.727 ms 5.722 ms 5.726
>> ms
>>
>> and
>>
>> traceroute6 l.root-servers.net
>> traceroute to l.ROOT-SERVERS.NET (2001:500:9f::42) from
>> 2a00:1940:0:1::78,
>> 30 hops max, 24 byte packets
>> 1 lon1-gw1.merula.net (2a00:1940:0:1::70) 0.481 ms * 0.682 ms !N
>> 2 lon1-gw1.merula.net (2a00:1940:0:1::70) 0.614 ms !N 0.54 ms !N
>> 0.529
>> ms !N
>>
>> The zebta.log file is filled with lines like:
>> 2017/06/13 02:11:01 ZEBRA: zread_ipv6_add: Prefix 2402:2700:d1::/48
>> has 2
>> nexthops, but we can only use the first 1
>> 2017/06/13 02:11:01 ZEBRA: zread_ipv6_add: Prefix 2402:2700:d2::/48
>> has 2
>> nexthops, but we can only use the first 1
>> 2017/06/13 02:11:01 ZEBRA: zread_ipv6_add: Prefix 2402:2700:d3::/48
>> has 2
>> nexthops, but we can only use the first 1
>> 2017/06/13 02:11:01 ZEBRA: zread_ipv6_add: Prefix 2402:2700:d4::/48
>> has 2
>> nexthops, but we can only use the first 1
>> 2017/06/13 02:11:01 ZEBRA: zread_ipv6_add: Prefix 2402:2700:d5::/48
>> has 2
>> nexthops, but we can only use the first 1
>> 2017/06/13 02:11:01 ZEBRA: zread_ipv6_add: Prefix 2402:2700:d6::/48
>> has 2
>> nexthops, but we can only use the first 1
>> 2017/06/13 02:11:01 ZEBRA: zread_ipv6_add: Prefix 2402:2700:d7::/48
>> has 2
>> nexthops, but we can only use the first 1
>> 2017/06/13 02:11:01 ZEBRA: zread_ipv6_add: Prefix 2402:2700:d8::/48
>> has 2
>> nexthops, but we can only use the first 1
>>
>> and so on....
>>
>> What am I missing here - I am sure it is probbay something really
>> obvious
>> ...
>>
>> Can you help point me the right way ?
>>
>> Thanks!
>>
>> Richard
>>
>>
>>
>>
>> Richard Palmer | Director | Merula Limited
>> Company Registered in England and Wales No. 3243995
>> 5 Avro Court, Huntingdon, Cambridgeshire, PE29 6XS
>> Phone 01480 222940 | Support 0845 330 0666
>> Support Email support at merula.net
>>
>>
>> _______________________________________________
>> frog mailing list
>> frog at lists.frrouting.org
>> https://lists.frrouting.org/listinfo/frog
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.frrouting.org/pipermail/frog/attachments/20170613/5b10a3f1/attachment.html>
More information about the frog
mailing list