[FROG] [dev] VTY status 13 while sending config over vty socket

Donald Sharp sharpd at cumulusnetworks.com
Mon Oct 23 08:12:04 EDT 2017


Siddhesh -

This works for me:
dell-s6000-02# conf t
dell-s6000-02(config)# exit
dell-s6000-02# configure terminal
dell-s6000-02(config)#  router bgp 1234 vrf foo
dell-s6000-02(config-router)#  neighbor 2.2.2.2 remote-as 3456
dell-s6000-02(config-router)#  neighbor 2.2.2.2 shutdown
dell-s6000-02(config-router)#  address-family ipv6 unicast
dell-s6000-02(config-router-af)#  redistribute connected
dell-s6000-02(config-router-af)#  exit-address-family
dell-s6000-02(config-router)#  address-family ipv6 unicast
dell-s6000-02(config-router-af)#  redistribute static
dell-s6000-02(config-router-af)#  exit-address-family
dell-s6000-02(config-router)#  address-family ipv4 unicast
dell-s6000-02(config-router-af)#  redistribute connected
dell-s6000-02(config-router-af)#  exit-address-family
dell-s6000-02(config-router)#  address-family ipv4 unicast
dell-s6000-02(config-router-af)#  redistribute static
dell-s6000-02(config-router-af)#  exit-address-family
dell-s6000-02(config-router)#  end
dell-s6000-02# end
dell-s6000-02# show run
!
router bgp 1234 vrf foo
 neighbor 2.2.2.2 remote-as 3456
 neighbor 2.2.2.2 shutdown
 !
 address-family ipv4 unicast
  redistribute connected
  redistribute static
 exit-address-family
 !
 address-family ipv6 unicast
  redistribute connected
  redistribute static
 exit-address-family
!

What version of FRR are you using?

On Wed, Oct 18, 2017 at 4:06 PM, $iddhe$h Divekar
<siddhesh.divekar at gmail.com> wrote:
> Hi,
> Am getting following error when sending config over vty socket.
> VTY status 13.
>
> Below is the config am trying to send.
> It happens when "redistribute connected" is sent over the socket.
>
>  configure terminal
>  router bgp 1234 vrf foo
>  neighbor 2.2.2.2 remote-as 3456
>  neighbor 2.2.2.2 shutdown
>  address-family ipv6 unicast
>  redistribute connected
>  exit-address-family
>  address-family ipv6 unicast
>  redistribute static
>  exit-address-family
>  address-family ipv4 unicast
>  redistribute connected
>  exit-address-family
>  address-family ipv4 unicast
>  redistribute static
>  exit-address-family
>  end
>
> If I do show running I see following config applied.
> router bgp 1234 vrf foo
>  neighbor 2.2.2.2 remote-as 3456
>  neighbor 2.2.2.2 shutdown
>  !
>  address-family ipv6 unicast
>   redistribute connected
>  exit-address-family
> !
>
> Is there anything wrong with the config.
> Copy pasting the config directly works fine.
>
> --
> -$iddhesh.
>
> _______________________________________________
> dev mailing list
> dev at lists.frrouting.org
> https://lists.frrouting.org/listinfo/dev
>



More information about the frog mailing list