[FROG] New EVPN Code in Master

[Mitesh Kanjariya]

Hi Rendo,

   You need to enable type-5 route advertisement. Please find an example
below. The CLI in red will do the trick.

    router bgp <> vrf <>

        address-family l2vpn evpn

            advertise ipv4 unicast

     exit-address-family

     end


    For reference yo could follow:
https://docs.cumulusnetworks.com/display/DOCS/Ethernet+Virtual+Private+Network+-+EVPN

On Tue, Jan 16, 2018 at 2:02 PM, rendo <rendo.aw at gmail.com> wrote:

> Hi Donald,
>
> Thanks for the update and thanks for everyone involved to make this
> happen.
>
> Out of my curiosity, I did a quick test, and evpn type 2 looks very good,
> both control plane and data plane works as expected.
> For type 5, i can see my FRR is able to receive the prefix, but i could
> not find a way to advertise my local prefix as type 5. Please let me know
> if you have any doc/pointer for this.
>
>
> Thanks.
>
> rendo
>
>
> On Sat, Jan 13, 2018 at 8:05 AM, Donald Sharp <sharpd at cumulusnetworks.com>
> wrote:
>
>> All -
>>
>> EVPN control plane in FRR is now enhanced so that it supports both
>> asymmetric and symmetric routing models. Prefix-based routing is also
>> supported using EVPN type-5 routes. Also, with all routing models, L3
>> multi-tenancy is inherently supported
>>
>> I'd like to thank Mitesh for his hard work getting this done!
>>
>> thanks!
>>
>> donald
>>
>> _______________________________________________
>> frog mailing list
>> frog at lists.frrouting.org
>> https://lists.frrouting.org/listinfo/frog
>>
>
>


-- 
Regards,
Mitesh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.frrouting.org/pipermail/frog/attachments/20180116/80e672fe/attachment.html>