[FROG] L3vpn and FRR - Issue
Rakesh M
raaki.88 at gmail.com
Thu Apr 23 18:31:41 EDT 2020
Hi All,
I have a peculiar problem with reaching two VPN endpoints between L3VPN
enabled FRR Routers
I see the routes and everything w.r.t to control plane appears to be fine,
but when I try to source the traffic I cant ping each other
r1# sh ip route vrf BLUE
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued route, r - rejected
route
VRF BLUE:
B> 100.65.64.152/30 [200/0] via x.x.x.x(vrf default) (recursive), label
16, 00:33:56
* via 100.65.64.137, bond0.3054(vrf default),
label 179/16, 00:33:56
C>* 100.65.64.156/30 is directly connected, bond0.3600, 00:47:03
B> 100.65.64.160/30 [200/0] via x.x.x.x(vrf default) (recursive), label
16, 00:13:06
* via 100.65.64.137, bond0.3054(vrf default),
label 179/16, 00:13:06
C>* 100.65.64.164/30 is directly connected, eth10, 00:13:24
*root at r1:~# ping -I eth10 100.65.64.161ping: Warning: source address might
be selected on device other than eth10.PING 100.65.64.161 (100.65.64.161)
from 100.65.64.138 eth10: 56(84) bytes of data.^C*
I don't understand this message at all, why it always picking a wrong
address when I try to ping it.
Can anyone give insights to this?
--
--
Rakesh Madupu
2xJNCIE - SP/DC / CCIE-SP#47613
https://r2079.wordpress.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.frrouting.org/pipermail/frog/attachments/20200423/f2d11555/attachment.html>
More information about the frog
mailing list