[FROG] "show bgp" command behaviour

[Amol Lad]

Hi,

I'm using FRR 7.4 and observed that "show bgp" does not show any prefixes but "show bgp ipv4" does show the prefixes. Is this expected behaviour?

Thanks
Amol

FRR(config-router)# do show bgp
No BGP prefixes displayed, 0 exist

FRR(config-router)# do show bgp ipv4
BGP table version is 2, local router ID is 172.16.1.106, vrf id 0
Default local pref 100, local AS 1
Status codes:  s suppressed, d damped, h history, * valid, > best, = multipath,
               i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes:  i - IGP, e - EGP, ? - incomplete

   Network          Next Hop            Metric LocPrf Weight Path
*> 1.1.1.0/24       0.0.0.0                  0         32768 i
*> 2.2.2.0/24       172.16.1.107             0             0 2 i