[FROG] Migration scripts for FRR from Quagga

[Donald Sharp]

In general you should just be able to use the Quagga configs directly in
FRR(There are a couple caveats of course ).  I am not aware of any
conversion/migration scripts though.  Have you tried just loading the
config and seeing what happens? Then comparing a show run to the saved
config?

donald

On Wed, Apr 17, 2024 at 4:29 PM Doug Tucker via frog <
frog at lists.frrouting.org> wrote:

>
>
>
> ---------- Forwarded message ----------
> From: Doug Tucker <doug.tucker at navigaglobal.com>
> To: "frog at lists.frrouting.org" <frog at lists.frrouting.org>
> Cc:
> Bcc:
> Date: Wed, 17 Apr 2024 19:23:33 +0000
> Subject: Migration scripts for FRR from Quagga
> I am needing to undertake migrating from all of my quagga instances to
> frr.  I have read through the general documentation but before I started
> from scratch I thought I would see if there were some migration/conversion
> scripts available for existing quagga installations.  Thank you for your
> assistance.
>
> *Doug Tucker*
>
>
>
>
> ---------- Forwarded message ----------
> From: Doug Tucker via frog <frog at lists.frrouting.org>
> To: "frog at lists.frrouting.org" <frog at lists.frrouting.org>
> Cc:
> Bcc:
> Date: Wed, 17 Apr 2024 19:23:33 +0000
> Subject: [FROG] Migration scripts for FRR from Quagga
> _______________________________________________
> frog mailing list
> frog at lists.frrouting.org
> https://lists.frrouting.org/listinfo/frog
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.frrouting.org/pipermail/frog/attachments/20240417/8664e2cf/attachment.htm>