All - EVPN control plane in FRR is now enhanced so that it supports both asymmetric and symmetric routing models. Prefix-based routing is also supported using EVPN type-5 routes. Also, with all routing models, L3 multi-tenancy is inherently supported I'd like to thank Mitesh for his hard work getting this done! thanks! donald
Hi Donald, Thanks for the update and thanks for everyone involved to make this happen. Out of my curiosity, I did a quick test, and evpn type 2 looks very good, both control plane and data plane works as expected. For type 5, i can see my FRR is able to receive the prefix, but i could not find a way to advertise my local prefix as type 5. Please let me know if you have any doc/pointer for this. Thanks. rendo On Sat, Jan 13, 2018 at 8:05 AM, Donald Sharp <sharpd@cumulusnetworks.com> wrote:
All -
EVPN control plane in FRR is now enhanced so that it supports both asymmetric and symmetric routing models. Prefix-based routing is also supported using EVPN type-5 routes. Also, with all routing models, L3 multi-tenancy is inherently supported
I'd like to thank Mitesh for his hard work getting this done!
thanks!
donald
_______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog
Hi Rendo, You need to enable type-5 route advertisement. Please find an example below. The CLI in red will do the trick. router bgp <> vrf <> address-family l2vpn evpn advertise ipv4 unicast exit-address-family end For reference yo could follow: https://docs.cumulusnetworks.com/display/DOCS/Ethernet+Virtual+Private+Netwo... On Tue, Jan 16, 2018 at 2:02 PM, rendo <rendo.aw@gmail.com> wrote:
Hi Donald,
Thanks for the update and thanks for everyone involved to make this happen.
Out of my curiosity, I did a quick test, and evpn type 2 looks very good, both control plane and data plane works as expected. For type 5, i can see my FRR is able to receive the prefix, but i could not find a way to advertise my local prefix as type 5. Please let me know if you have any doc/pointer for this.
Thanks.
rendo
On Sat, Jan 13, 2018 at 8:05 AM, Donald Sharp <sharpd@cumulusnetworks.com> wrote:
All -
EVPN control plane in FRR is now enhanced so that it supports both asymmetric and symmetric routing models. Prefix-based routing is also supported using EVPN type-5 routes. Also, with all routing models, L3 multi-tenancy is inherently supported
I'd like to thank Mitesh for his hard work getting this done!
thanks!
donald
_______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog
-- Regards, Mitesh
Hi Mitesh, maybe i am missing something, looks like the cli reject it linux-93# conf t linux-93(config)# router bgp 64000 vrf vrf-110 linux-93(config-router)# address-family l2vpn evpn Only Unicast and Multicast SAFIs supported in non-core instances. linux-93(config-router)# and this is my vrf linux-93# show ip route vrf vrf-110 Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP, T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, > - selected route, * - FIB route VRF vrf-110: C>* 10.93.193.0/24 is directly connected, ens7, 2d01h49m C>* 10.93.253.0/24 is directly connected, br110, 2d01h49m I also tried "advertise-subnet" as mentioned in cumulus doc, the command is rejected too linux-93(config)# router bgp 64000 linux-93(config-router)# address-family l2vpn evpn linux-93(config-router-af)# vni 20110 linux-93(config-router-af-vni)# advertise-subnet % Unknown command. I tried few other thing, and this is my current config. It still the same, my instance can receive RT 5 prefix, but it send nothing. vrf vrf-110 vni 20110 ! ... router bgp 64000 coalesce-time 1000 neighbor 10.0.0.11 remote-as 64000 neighbor 10.0.0.11 update-source 10.0.0.93 ! address-family l2vpn evpn neighbor 10.0.0.11 activate vni 20110 rd 10.0.0.93:110 route-target import 64000:110 route-target export 64000:110 advertise-default-gw exit-vni vni 10100 rd 10.0.0.93:100 route-target import 64200:100 route-target export 64200:100 exit-vni advertise-all-vni advertise ipv4 unicast exit-address-family vrf-policy vrf-110 rd 10.0.0.93:901 rt both 64000:901 exit-vrf-policy vnc defaults exit-vnc ! router bgp 64000 vrf vrf-110 coalesce-time 1000 ! address-family ipv4 unicast network 0.0.0.0/0 redistribute kernel redistribute connected redistribute static exit-address-family ! linux-93# show bgp l2vpn evpn ... Route Distinguisher: ip 10.0.0.21:110 *>i[5]:[0]:[24]:[10.21.121.0] 10.0.1.21 0 100 0 ? ... *>i[5]:[0]:[24]:[10.25.125.0] 10.0.0.25 100 0 i Route Distinguisher: ip 10.0.0.93:100 ... Thanks. rendo On Tue, Jan 16, 2018 at 5:31 PM, Mitesh Kanjariya < mitesh@cumulusnetworks.com> wrote:
Hi Rendo,
You need to enable type-5 route advertisement. Please find an example below. The CLI in red will do the trick.
router bgp <> vrf <>
address-family l2vpn evpn
advertise ipv4 unicast
exit-address-family
end
For reference yo could follow: https://docs. cumulusnetworks.com/display/DOCS/Ethernet+Virtual+Private+Network+-+EVPN
On Tue, Jan 16, 2018 at 2:02 PM, rendo <rendo.aw@gmail.com> wrote:
Hi Donald,
Thanks for the update and thanks for everyone involved to make this happen.
Out of my curiosity, I did a quick test, and evpn type 2 looks very good, both control plane and data plane works as expected. For type 5, i can see my FRR is able to receive the prefix, but i could not find a way to advertise my local prefix as type 5. Please let me know if you have any doc/pointer for this.
Thanks.
rendo
On Sat, Jan 13, 2018 at 8:05 AM, Donald Sharp <sharpd@cumulusnetworks.com
wrote:
All -
EVPN control plane in FRR is now enhanced so that it supports both asymmetric and symmetric routing models. Prefix-based routing is also supported using EVPN type-5 routes. Also, with all routing models, L3 multi-tenancy is inherently supported
I'd like to thank Mitesh for his hard work getting this done!
thanks!
donald
_______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog
-- Regards, Mitesh
Hi Rendo, I'll let Mitesh check on and respond to why you are unable to configure the "advertise ipv4 unicast" command. It is possible some commit has been missed. We do have some additional fixes that Mitesh is in the process of submitting. In any case, the idea is to control the injection of EVPN type-5 routes using this command. We're going to support a route-map option also for it in an upcoming commit. Regarding advertising subnet routes for the locally configured subnets, we're having a rethink on the need for an additional command. The same can be achieved by redistributing connected routes of the VRF into BGP and then using the "advertise ipv4 unicast" command. Control for advertising specific subnets can be currently achieved through use of route-map for the redistribute command, and subsequently, using route-map for the "advertise" command. Our documents aren't updated yet as we haven't concluded on this, however, I recommend that you try out this approach as soon as the "advertise ipv4 unicast" command is working. Thanks, Vivek On Tue, Jan 16, 2018 at 7:09 PM, rendo <rendo.aw@gmail.com> wrote:
Hi Mitesh,
maybe i am missing something, looks like the cli reject it
linux-93# conf t linux-93(config)# router bgp 64000 vrf vrf-110 linux-93(config-router)# address-family l2vpn evpn Only Unicast and Multicast SAFIs supported in non-core instances. linux-93(config-router)#
and this is my vrf
linux-93# show ip route vrf vrf-110 Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP, T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, > - selected route, * - FIB route
VRF vrf-110: C>* 10.93.193.0/24 is directly connected, ens7, 2d01h49m C>* 10.93.253.0/24 is directly connected, br110, 2d01h49m
I also tried "advertise-subnet" as mentioned in cumulus doc, the command is rejected too
linux-93(config)# router bgp 64000 linux-93(config-router)# address-family l2vpn evpn linux-93(config-router-af)# vni 20110 linux-93(config-router-af-vni)# advertise-subnet % Unknown command.
I tried few other thing, and this is my current config. It still the same, my instance can receive RT 5 prefix, but it send nothing.
vrf vrf-110 vni 20110 !
...
router bgp 64000 coalesce-time 1000 neighbor 10.0.0.11 remote-as 64000 neighbor 10.0.0.11 update-source 10.0.0.93 ! address-family l2vpn evpn neighbor 10.0.0.11 activate vni 20110 rd 10.0.0.93:110 route-target import 64000:110 route-target export 64000:110 advertise-default-gw exit-vni vni 10100 rd 10.0.0.93:100 route-target import 64200:100 route-target export 64200:100 exit-vni advertise-all-vni advertise ipv4 unicast exit-address-family vrf-policy vrf-110 rd 10.0.0.93:901 rt both 64000:901 exit-vrf-policy vnc defaults exit-vnc ! router bgp 64000 vrf vrf-110 coalesce-time 1000 ! address-family ipv4 unicast network 0.0.0.0/0 redistribute kernel redistribute connected redistribute static exit-address-family !
linux-93# show bgp l2vpn evpn
... Route Distinguisher: ip 10.0.0.21:110
*>i[5]:[0]:[24]:[10.21.121.0] 10.0.1.21 0 100 0 ? ...
*>i[5]:[0]:[24]:[10.25.125.0] 10.0.0.25 100 0 i Route Distinguisher: ip 10.0.0.93:100
...
Thanks.
rendo
On Tue, Jan 16, 2018 at 5:31 PM, Mitesh Kanjariya < mitesh@cumulusnetworks.com> wrote:
Hi Rendo,
You need to enable type-5 route advertisement. Please find an example below. The CLI in red will do the trick.
router bgp <> vrf <>
address-family l2vpn evpn
advertise ipv4 unicast
exit-address-family
end
For reference yo could follow: https://docs.cumulusne tworks.com/display/DOCS/Ethernet+Virtual+Private+Network+-+EVPN
On Tue, Jan 16, 2018 at 2:02 PM, rendo <rendo.aw@gmail.com> wrote:
Hi Donald,
Thanks for the update and thanks for everyone involved to make this happen.
Out of my curiosity, I did a quick test, and evpn type 2 looks very good, both control plane and data plane works as expected. For type 5, i can see my FRR is able to receive the prefix, but i could not find a way to advertise my local prefix as type 5. Please let me know if you have any doc/pointer for this.
Thanks.
rendo
On Sat, Jan 13, 2018 at 8:05 AM, Donald Sharp < sharpd@cumulusnetworks.com> wrote:
All -
EVPN control plane in FRR is now enhanced so that it supports both asymmetric and symmetric routing models. Prefix-based routing is also supported using EVPN type-5 routes. Also, with all routing models, L3 multi-tenancy is inherently supported
I'd like to thank Mitesh for his hard work getting this done!
thanks!
donald
_______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog
-- Regards, Mitesh
Hi Rendo, I checked the code. As Vivek mentioned, we are missing some commits which unblocks "l2vpn evpn" under non-default VRFs. We should be getting those in with the next PR within a few days. On Tue, Jan 16, 2018 at 8:01 PM, Vivek Venkatraman < vivek@cumulusnetworks.com> wrote:
Hi Rendo,
I'll let Mitesh check on and respond to why you are unable to configure the "advertise ipv4 unicast" command. It is possible some commit has been missed. We do have some additional fixes that Mitesh is in the process of submitting. In any case, the idea is to control the injection of EVPN type-5 routes using this command. We're going to support a route-map option also for it in an upcoming commit.
Regarding advertising subnet routes for the locally configured subnets, we're having a rethink on the need for an additional command. The same can be achieved by redistributing connected routes of the VRF into BGP and then using the "advertise ipv4 unicast" command. Control for advertising specific subnets can be currently achieved through use of route-map for the redistribute command, and subsequently, using route-map for the "advertise" command. Our documents aren't updated yet as we haven't concluded on this, however, I recommend that you try out this approach as soon as the "advertise ipv4 unicast" command is working.
Thanks, Vivek
On Tue, Jan 16, 2018 at 7:09 PM, rendo <rendo.aw@gmail.com> wrote:
Hi Mitesh,
maybe i am missing something, looks like the cli reject it
linux-93# conf t linux-93(config)# router bgp 64000 vrf vrf-110 linux-93(config-router)# address-family l2vpn evpn Only Unicast and Multicast SAFIs supported in non-core instances. linux-93(config-router)#
and this is my vrf
linux-93# show ip route vrf vrf-110 Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP, T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, > - selected route, * - FIB route
VRF vrf-110: C>* 10.93.193.0/24 is directly connected, ens7, 2d01h49m C>* 10.93.253.0/24 is directly connected, br110, 2d01h49m
I also tried "advertise-subnet" as mentioned in cumulus doc, the command is rejected too
linux-93(config)# router bgp 64000 linux-93(config-router)# address-family l2vpn evpn linux-93(config-router-af)# vni 20110 linux-93(config-router-af-vni)# advertise-subnet % Unknown command.
I tried few other thing, and this is my current config. It still the same, my instance can receive RT 5 prefix, but it send nothing.
vrf vrf-110 vni 20110 !
...
router bgp 64000 coalesce-time 1000 neighbor 10.0.0.11 remote-as 64000 neighbor 10.0.0.11 update-source 10.0.0.93 ! address-family l2vpn evpn neighbor 10.0.0.11 activate vni 20110 rd 10.0.0.93:110 route-target import 64000:110 route-target export 64000:110 advertise-default-gw exit-vni vni 10100 rd 10.0.0.93:100 route-target import 64200:100 route-target export 64200:100 exit-vni advertise-all-vni advertise ipv4 unicast exit-address-family vrf-policy vrf-110 rd 10.0.0.93:901 rt both 64000:901 exit-vrf-policy vnc defaults exit-vnc ! router bgp 64000 vrf vrf-110 coalesce-time 1000 ! address-family ipv4 unicast network 0.0.0.0/0 redistribute kernel redistribute connected redistribute static exit-address-family !
linux-93# show bgp l2vpn evpn
... Route Distinguisher: ip 10.0.0.21:110
*>i[5]:[0]:[24]:[10.21.121.0] 10.0.1.21 0 100 0 ? ...
*>i[5]:[0]:[24]:[10.25.125.0] 10.0.0.25 100 0 i Route Distinguisher: ip 10.0.0.93:100
...
Thanks.
rendo
On Tue, Jan 16, 2018 at 5:31 PM, Mitesh Kanjariya < mitesh@cumulusnetworks.com> wrote:
Hi Rendo,
You need to enable type-5 route advertisement. Please find an example below. The CLI in red will do the trick.
router bgp <> vrf <>
address-family l2vpn evpn
advertise ipv4 unicast
exit-address-family
end
For reference yo could follow: https://docs.cumulusne tworks.com/display/DOCS/Ethernet+Virtual+Private+Network+-+EVPN
On Tue, Jan 16, 2018 at 2:02 PM, rendo <rendo.aw@gmail.com> wrote:
Hi Donald,
Thanks for the update and thanks for everyone involved to make this happen.
Out of my curiosity, I did a quick test, and evpn type 2 looks very good, both control plane and data plane works as expected. For type 5, i can see my FRR is able to receive the prefix, but i could not find a way to advertise my local prefix as type 5. Please let me know if you have any doc/pointer for this.
Thanks.
rendo
On Sat, Jan 13, 2018 at 8:05 AM, Donald Sharp < sharpd@cumulusnetworks.com> wrote:
All -
EVPN control plane in FRR is now enhanced so that it supports both asymmetric and symmetric routing models. Prefix-based routing is also supported using EVPN type-5 routes. Also, with all routing models, L3 multi-tenancy is inherently supported
I'd like to thank Mitesh for his hard work getting this done!
thanks!
donald
_______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog
-- Regards, Mitesh
-- Regards, Mitesh
Vivek, Mitesh, Thanks a lot for checking. I'll try again once the fix is available. rendo On Wed, Jan 17, 2018 at 1:39 PM, Mitesh Kanjariya < mitesh@cumulusnetworks.com> wrote:
Hi Rendo,
I checked the code. As Vivek mentioned, we are missing some commits which unblocks "l2vpn evpn" under non-default VRFs. We should be getting those in with the next PR within a few days.
On Tue, Jan 16, 2018 at 8:01 PM, Vivek Venkatraman < vivek@cumulusnetworks.com> wrote:
Hi Rendo,
I'll let Mitesh check on and respond to why you are unable to configure the "advertise ipv4 unicast" command. It is possible some commit has been missed. We do have some additional fixes that Mitesh is in the process of submitting. In any case, the idea is to control the injection of EVPN type-5 routes using this command. We're going to support a route-map option also for it in an upcoming commit.
Regarding advertising subnet routes for the locally configured subnets, we're having a rethink on the need for an additional command. The same can be achieved by redistributing connected routes of the VRF into BGP and then using the "advertise ipv4 unicast" command. Control for advertising specific subnets can be currently achieved through use of route-map for the redistribute command, and subsequently, using route-map for the "advertise" command. Our documents aren't updated yet as we haven't concluded on this, however, I recommend that you try out this approach as soon as the "advertise ipv4 unicast" command is working.
Thanks, Vivek
On Tue, Jan 16, 2018 at 7:09 PM, rendo <rendo.aw@gmail.com> wrote:
Hi Mitesh,
maybe i am missing something, looks like the cli reject it
linux-93# conf t linux-93(config)# router bgp 64000 vrf vrf-110 linux-93(config-router)# address-family l2vpn evpn Only Unicast and Multicast SAFIs supported in non-core instances. linux-93(config-router)#
and this is my vrf
linux-93# show ip route vrf vrf-110 Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP, T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP, > - selected route, * - FIB route
VRF vrf-110: C>* 10.93.193.0/24 is directly connected, ens7, 2d01h49m C>* 10.93.253.0/24 is directly connected, br110, 2d01h49m
I also tried "advertise-subnet" as mentioned in cumulus doc, the command is rejected too
linux-93(config)# router bgp 64000 linux-93(config-router)# address-family l2vpn evpn linux-93(config-router-af)# vni 20110 linux-93(config-router-af-vni)# advertise-subnet % Unknown command.
I tried few other thing, and this is my current config. It still the same, my instance can receive RT 5 prefix, but it send nothing.
vrf vrf-110 vni 20110 !
...
router bgp 64000 coalesce-time 1000 neighbor 10.0.0.11 remote-as 64000 neighbor 10.0.0.11 update-source 10.0.0.93 ! address-family l2vpn evpn neighbor 10.0.0.11 activate vni 20110 rd 10.0.0.93:110 route-target import 64000:110 route-target export 64000:110 advertise-default-gw exit-vni vni 10100 rd 10.0.0.93:100 route-target import 64200:100 route-target export 64200:100 exit-vni advertise-all-vni advertise ipv4 unicast exit-address-family vrf-policy vrf-110 rd 10.0.0.93:901 rt both 64000:901 exit-vrf-policy vnc defaults exit-vnc ! router bgp 64000 vrf vrf-110 coalesce-time 1000 ! address-family ipv4 unicast network 0.0.0.0/0 redistribute kernel redistribute connected redistribute static exit-address-family !
linux-93# show bgp l2vpn evpn
... Route Distinguisher: ip 10.0.0.21:110
*>i[5]:[0]:[24]:[10.21.121.0] 10.0.1.21 0 100 0 ? ...
*>i[5]:[0]:[24]:[10.25.125.0] 10.0.0.25 100 0 i Route Distinguisher: ip 10.0.0.93:100
...
Thanks.
rendo
On Tue, Jan 16, 2018 at 5:31 PM, Mitesh Kanjariya < mitesh@cumulusnetworks.com> wrote:
Hi Rendo,
You need to enable type-5 route advertisement. Please find an example below. The CLI in red will do the trick.
router bgp <> vrf <>
address-family l2vpn evpn
advertise ipv4 unicast
exit-address-family
end
For reference yo could follow: https://docs.cumulusne tworks.com/display/DOCS/Ethernet+Virtual+Private+Network+-+EVPN
On Tue, Jan 16, 2018 at 2:02 PM, rendo <rendo.aw@gmail.com> wrote:
Hi Donald,
Thanks for the update and thanks for everyone involved to make this happen.
Out of my curiosity, I did a quick test, and evpn type 2 looks very good, both control plane and data plane works as expected. For type 5, i can see my FRR is able to receive the prefix, but i could not find a way to advertise my local prefix as type 5. Please let me know if you have any doc/pointer for this.
Thanks.
rendo
On Sat, Jan 13, 2018 at 8:05 AM, Donald Sharp < sharpd@cumulusnetworks.com> wrote:
All -
EVPN control plane in FRR is now enhanced so that it supports both asymmetric and symmetric routing models. Prefix-based routing is also supported using EVPN type-5 routes. Also, with all routing models, L3 multi-tenancy is inherently supported
I'd like to thank Mitesh for his hard work getting this done!
thanks!
donald
_______________________________________________ frog mailing list frog@lists.frrouting.org https://lists.frrouting.org/listinfo/frog
-- Regards, Mitesh
-- Regards, Mitesh
participants (4)
-
Donald Sharp -
Mitesh Kanjariya -
rendo -
Vivek Venkatraman